Gauge/Thickness of Steel Used with Torflex Lift Kit part # K71-707-01

Question

Question:

Hello, Can you tell me what gauge and thickness the steel is?

asked by: Mark

1

Helpful Expert Reply:

The Torflex Lift Kit part # K71-707-01 is made from 7 gauge steel which is 3/16 inch thick. I attached a review video for this for you to check out as well for more info.

expert reply by: Jameson C

1

Answer 1

Torflex Lift Kit - Single Axle - 2-5/8" Lift Item #K71-707-01 is designed for a single #10 Torflex axle with 2,300 to 4,000-lb capacities. According to our research the Lance 1575 does use a #10 Torflex axle so as long as your 1575 is not an…

view full answer...

Answer 2

You can use two sets of the #K71-707-01 on a tandem axle trailer and it would be same as the part #K71-707-02.

view full answer...

Answer 3

The axle number you mentioned along with the specs for your 2014 Lance 1575 Trailer indicate that you have a Dexter #10 Torflex 3,500 pound axle for which the Torflex Lift Kit #K71-707-01 is designed. This will raise the trailer frame by 2-5/8…

view full answer...

Answer 4

I can absolutely confirm the correct lift kit for your trailer. Based on your photos, you do in fact have a #10 Torflex axle, and they are compatible with the lift kits because you do not have 3" high-profile brackets (which just means the…

view full answer...

Answer 5

Your 2017 Lance 1475 has the Dexter #10 torsion axle. The lift kit for that axle is #K71-707-01. This will lift your trailer frame by 2-5/8 inches you requested.

view full answer...

Answer 6

The Expert question you are referring to is actually fairly old and the diagram for the Firestone Ride-Rite Air Helper Springs #F2430 that fit your 2014 GMC Sierra 1500 was updated to the bracket change that Firestone initiated for this kit. I have…

view full answer...

Answer 7

For your Dura-Flex 4,300 lb axle, we don't have a confirmed fit lift. If you axle mounting holes are 8 inches on center you can use #K71-707-01 to gain a 2-5/8 inch lift. This is rated for Dexter Torflex Axles up to 4,000 lbs capacity, so the…

view full answer...

Answer 8

The only lift kit that Dexter Axle offers for your Torflex #11 axle, for whatever reason, is the Tandem Axle Kit #K71-724-02. We've double checked with Dexter directly a few different times and this is just what they sell. With this being the…

view full answer...

Answer 9

On the Torflex Lift Kit #K71-707-01 the distance from the center of one bolt hole to the center of the other hole is 8 inches. The overall length is approximately 9-3/4 inches. I have linked a video of this product for you as well.

view full answer...

Answer 10

Since your 2011 Jayco Jay Feather Ultra Lite X17Z has a #10 Dexter Torflex axle the only lift kit available for it is the #K71-707-01 is the correct lift kit, and its 2-5/8" lift is the most that is available for your trailer. If this is not…

view full answer...

Answer 11

For your 2003 Sun Valley RoadRunner travel trailer, the #10 torflex axle will use lift kit #K71-707-01 if your axle is rated for 2,300 to 4,000 lbs. If you have a #9 Torflex axle with 2,000 lb capacity then you will want #K71-723-01. We also tandem…

view full answer...

Answer 12

The axle number you gave appears to be either a #10 or #11 Torflex Axle. You can confirm this by checking the bolts where it meets your frame and they will be 8 inches on center. If this is the case then you will use lift kit #K71-707-01. If instead…

view full answer...

Gauge/Thickness of Steel Used with Torflex Lift Kit part # K71-707-01

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching