Does the Buyers Products Utility Storage Box 3371712240 Have A Divider

Question

Question:

In the pictures of the chest it looks as if there is some sort of plastic divider inside the box. If this Is the case, is the divider removable?

asked by: Shannon

1

Helpful Expert Reply:

The Buyers Products Utility Storage Box part # 3371712240 does not come with any sort of divider so you would be able to use the full internal storage space without issue. I have attached a review video for that shows the inside of the box which you can see no divider is present.

expert reply by: Conner L

1

Answer 1

The Buyers Products Utility Storage Box, #3371712250 has a top of box measurement of 51" x 19-1/2" with a height of 22-1/2". The base being 46.5" x 15.5". Please note the attached image.

view full answer...

Answer 2

The inside dimensions of the Buyers Products Utility Storage Box part #3371712240 are 41" long by 18-1/2" wide by 15-1/2" tall.

view full answer...

Answer 3

The UWS 48" Standard Chest for UWS Hitch Cargo Carrier part #UWS01022 is Aluminum so it is going to be lightweight compared to other toolboxes. It weighs about 45 lbs so you would want to make sure not to exceed the weight capacity of the cargo…

view full answer...

Answer 4

The Dimensions for the UWS 48" Standard Chest #UWS01022 are as follows. I have also included a picture of these to clear up any confusion. Base Length: 47" Base Depth: 20" Lid Length: 47-7/8" Lid Depth: 20-11/16" Height:…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...