Correct Roadmaster Steering Stabilizer for 2022 Winnebago Sunstar 29V Motorhome

Question

Question:

Want to install an anti-sway bar on RV, will this work for my motorhome? 2022 Winnebago Sunstar 29V steering stabilizer

asked by: Joan D

0

Expert Reply:

Yes, I verified directly with Roadmaster that the Exact Center Steering Stabilizer # RM63RR you referenced will fit and work perfectly on your 2022 Winnebago Sunstar 29V Motorhome.

It will simply mount between the steering mechanism and chassis to create a tight connection for drastic reduction in wandering and quick corrections of oversteering to make your trips much more enjoyable.

expert reply by: Chris R

0

Answer 1

The difference between the Roadmaster Reflex steering stabilizers is how they connect to the brackets that fit onto the RV. Take a look at the pictures I attached and you can see the difference between the ends of them. #RM-RSSA has eyes on both…

view full answer...

Answer 2

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a…

view full answer...

Answer 3

In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you were looking for, please just…

view full answer...

Answer 4

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 5

There is a suspension enhancement option for your 2021 Entegra Vision XL built on a Ford F-53 chassis, but I verified with the manufacturer that the steering stabilizer only fits if you have at least a 24,000 lb GVWR. You're not out of luck…

view full answer...

Answer 6

For your 2024 Ford F-53, I recommend checking out the Timbren Front Suspension Enhancement System #TFFF53B for the front, and the Timbren Rear Suspension Enhancement System #TFRF53A for the rear. These kits do not require drilling, will replace your…

view full answer...

Answer 7

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 8

I found the online version of the install instructions for the Exact Center stabilizers like the #RM47MR. What's fun is that just when you think you have found the correct step to address your problem it tells you to continue to the next step.…

view full answer...

Answer 9

To flat tow your 2021 Jeep Wrangler Unlimited 4Xe Rubicon Hybrid you will need a tow bar, base plate, tow bar wiring kit, braking system, and safety cables. I have the following recommendations for you listed below: Tow Bar: Roadmaster Nighthawk All…

view full answer...

Answer 10

Hey Scott, so we do have the SumoSpring Solo kit part #SSR-130-54 that is a confirmed fit for your 2018 Ford motorhome built on an E-450 chassis.

view full answer...

Answer 11

To replace/upgrade the bushings on the rear factory sway bar of your 2009 Class A Newmar Canyon Star RV you need one of the following Roadmaster kits based on the diameter of your factory sway bar: - 1-3/8" Diameter #RM-4139-300 - 1-1/2"…

view full answer...

Answer 12

The Roadmaster #RM-1139-140 and #RM-1139-148 are both replacement anti-sway bars for a Ford F550 or F53 Class A motorhome chassis. Both bars are 1-3/4 inches in diameter. The #RM-1139-140 fits models with a GVWR of 22K-24K, and the #RM-1139-148 fits…

view full answer...