Length and Diameter of Replacement Shoe Assembly # 3371303003 for Meyer Snowplow

Question

Question:

What is the shaft size? Thanks,

asked by: KEVIN W

0

Expert Reply:

The diameter of the shaft on the Replacement Shoe Assembly # 3371303003 is 1-1/4 inches and the length is 8-3/4 inches.

expert reply by: Jameson C

0

Answer 1

The Replacement Anti-Wear Shoe Assembly part #3371303300 for 6" or part #3371303305 for 7" should fit the Fishers XV2 Snow Plow. However, you will need to confirm this by making sure the post diameter of 1.32" will work for…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

We do have a shoe for a Meyer snowplow with a 3/4" diameter shaft, the Replacement Shoe Assembly for Meyer Snowplow - Standard (Drive Pro) #3371303002. I have added a link to a video review with dimensions of this part for you to check out as…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Length and Diameter of Replacement Shoe Assembly # 3371303003 for Meyer Snowplow

Product Page this Question was Asked From

Continue Researching