Where To Locate A Help Article On Ball Mount Rise And Drop

Question

Question:

I was reading a very good description of the ball mount rise and distance to the trailer but I now cant find that information. Can you please tell me where to find it on your site? Thank you.

asked by: Steve

0

Expert Reply:

I believe you are referencing the linked Help Article. If you gather the measurements and are looking for a ball mount recommendation, I would be happy to do that for you.

I also included a link to all our Help Articles you can find on our website organized by topic for future reference.

If this is not what you needed or still can't find, I'm happy to help further from here.

expert reply by: Patrick R

0

Answer 1

The 2 inch trailer ball on the Curt #C45554 can indeed be removed and swapped so it's in the rise position. The ball will need to be tightened to 250 foot lbs.

view full answer...

Answer 2

You'd have no problem removing the ball of the Curt Ball Mount #C45554 flipping the ball mount upside down and then reinstalling the hitch ball.

view full answer...

Answer 3

The Curt Towing Starter Kit part #C45554 will require more than one tool to tighten or loosen the hitch ball, you need an open-ended wrench, adjustable wrench, or table vice to hold the hitch ball and then a socket and ratchet to tighten the nut on…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Where To Locate A Help Article On Ball Mount Rise And Drop

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching