Using Trailer Valet XL Trailer Dolly on Incline
Question:
will the electric trailer dolly move the trailer if on an incline pushing up? I unfortunately have an incline about 30 long at approximately 1foot to 1.3inch in the 30. can it do it, or is it too much of an incline? I have no pics, sorry.
asked by: Pat B
Expert Reply:
I reached out to my contact at Trailer Valet regarding the XL Trailer Dolly # TVXL2 you referenced and he said that they have tested this unit to work well on up to a 7-8 degree incline.
Based on the 12 inch run and 1.3 inch rise you listed for your hill you are looking at around a 6 degree incline. With this in mind the Trailer Valet XL will work great for your application. Please just keep in mind that the powered drill bit shouldn't be used when pushing the dolly up a hill so you will need to use the manual crank instead. This will still allow for easy operation because of its chain drive system and multiple gear settings.
I have attached a short video demonstration that you can check out as well.
Product Page this Question was Asked From
Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball - 10,000 lbs
- Trailer Dolly
- Manual Dolly
- 10000 lbs Capacity
- 19 Inch Tall
- 20 Inch Tall
- Steel
- 2 Inch Ball
- Black
- Trailer Valet
more information >
Continue Researching
- Video: Review of Blue Ox Weight Distribution Hitch - BlueOx WD With Sway Control - BLU66UR
- Shop: Blue Ox TrackPro Weight Distribution w/ Sway Control - 11-Hole Shank - 6K GTW, 600 lbs TW
- Video: Trailer Valet 5X Swivel Jack and Trailer Mover Review
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 6,000 lbs GTW, 600 lbs TW
- Video: Curt Powered Tail Light Converter Installation - 2023 Chrysler Pacifica C59236
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: RV Interior Lighting
- Q&A: Weight Distribution Hitch For Trailer with Welded Frame Plate
- Search Results: e2 hitch
- Search Results: bunk fan
- Shop: Suspension Enhancement
- Q&A: Weight Distribution System for 3500 GVWR Pop-Up Camper Towed by Toyota Tundra
- Search Results: wheel dolly
- Video: Review of Optronics Trailer Wiring - 7 Way Round RV Style Trailer Connector To Blade - A7WCB
- Video: Powerbuilt 12 Point Socket with 3/4 Inch Drive Review
- Video: Review of Equal-i-zer Outer Link Plate for 8 Inch Trailer Frames - EQ90-02-5378
- Video: Review of Equal-i-zer Weight Distribution - EQ90-04-9281
- Search Results: tekonsha p2
- Shop: Trailer Wiring
- Shop: Brake Controller
- Shop: Chain Hangers for Reese Weight Distribution Systems - Bolt On
- Shop: 12V RV Reading Light with 2-Speed Fan - 8-1/2" Tall - White
- Shop: Inner Link Plate for Equal-i-zer Sway Control Bracket - 8" Trailer Frames - Qty 1
- Shop: Inner Link Plate for Equal-i-zer Sway Control Bracket - BAL Norco 4-3/8" Trailer Frames
- Q&A: How to Get Separate Turn Signals and Brake Lights to Work on a Trailer
- Q&A: Where to Find Brake Controller Stoplight Circuit Wire on 2017 Dodge Grand Caravan
- Shop: Trailer Hitch
- Search Results: trailer dolly
- Search Results: trailer tug
- Q&A: Can Holes be Drilled in Trailer Tongue to Install Buyers Products 10k Trailer Coupler