Replacement Mounting Hardware and Key For Karrite 1300 Cargo Box

Question

Question:

I have a Karrite 1300 cargo box and some of the hardware has rusted so its hard to get it on the bars can i replace it I also need a new key it says 2824

asked by: Mark R

0

Expert Reply:

Yes, we have the replacement mounting hardware you need for the Karrite 1300 with part # 1032802 according to Thule.

The replacement key is Thule replacement key (they manufactured the sears Karrite boxes) part # THKEYN2824.

expert reply by: Heather A

0

Answer 1

I double checked and the Replacement Mounting Hardware #1032802 will not have every piece needed to do a full replacement on your Karrite 1300 Series roof box. It will definitely fit your roof box, but you will also need Qty.4 of the Replacement…

view full answer...

Answer 2

The Thule Replacement U-Bolt for Thule Sidekick Cargo Box #TH02943 will be the correct fit for your Karrite Voyager Cargo Box. The U-bolt is 4 inches on center and 2 inches deep. Then you can use the Replacement Wingnut for Thule Cargo Boxes…

view full answer...

Answer 3

Good news! I can help you determine which replacement key is right for your Karrite 1300 cargo box. Karrite was made by Thule so you will need a Thule replacement key. Thanks for your pictures I was almost able to make out exactly which key you will…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 10

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 11

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Answer 12

A tow package for a vehicle is usually a frame mounted trailer hitch and trailer wiring on a vehicle like your 2002 Dodge Dakota. If you have those two things you could pretty easily assume you have the tow package. Or, you can take the VIN of your…

view full answer...