Do Bearings Need to be Removed to Install New Grease Seal on Hub
Question:
a grease seal just blew out on my new ez lube axle. to replace it, do I need to take all the bearings out? or, can i just take the hub off and put in a new seal from the back of the hub? Thanks
asked by: Wade S
Helpful Expert Reply:
The bearings for your trailer hub don't need to be removed/replaced when replacing the blown grease seal. As you mentioned you can simply tap in the new seal from the back of the hub once it's taken off the spindle. With that being said it's not a bad idea to go ahead and remove and inspect the bearings while you're in there to make sure there aren't any signs that anything needs to be replaced.
The Grease Seals # RG06-020 that you were looking at have a 1.500 inch inner diameter and a 1.987 inch outer diameter. You will just want to make sure this matches what you have to ensure a correct replacement.
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Continue Researching
- Search Results: spindle washer
- Search Results: l44649 bearing
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Washer For 1" Spindle
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Grease Seals (pair)
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Video: Choosing the Right Trailer Wiring
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Search Results: 25580
- Video: Choosing the Right Brake Controller
- Shop: Brake Controller
- Article: Most Popular Wheel Bearings
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Search Results: dust cap
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Q&A: How to Add Tension to Solera Slide-Topper
- Search Results: equalizer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)