Does Curt Hitch # C92UR Fit 2019 Honda Civic Sedan 4 Door

Question

Question:

will it work for the 2019 honda civic sedan 4 door

asked by: Ross R

0

Expert Reply:

Yes, the Curt trailer hitch part # C92UR is a confirmed fit for the 2019 Honda Civic Sedan 4 door models. I attached an install video for this hitch on a 2019 Civic like yours for you to check out. The installation instructions are also attached.

expert reply by: Jameson C

0

click to enlarge

Answer 1

An air powered die grinder will give you the best cut and finish when installing the Curt hitch part #C92UR on your 2018 Honda Civic Hatchback. But a Dremel tool with a cutting wheel that's powered by electricity would also work too.

view full answer...

Answer 2

The trailer hitch you want to install on your 2018 Honda Civic hatchback for carrying a bike rack is the Curt part #C92UR as it does not require a stabilizer strap when carrying a non-supported load like a bike rack like the Curt equivalent does. I…

view full answer...

Answer 3

Even though it is not a fit for it, it is not impossible to install the #C92UR Trailer Hitch Receiver on a 2019 Honda Civic Si. However, in order to do this, you will need to remove the center mounted exhaust pipe. I have attached a few photos for…

view full answer...

Answer 4

For your 2018 Honda Civic the trailer hitch I recommend is the Curt part #C92UR. This fits both the hatchbacks and the sedans and has a concealed crosstube which allows it to be mostly out of plain sight when installed.

view full answer...

Answer 5

The Curt Trailer Hitch Receiver #C92UR has a clean look once it is installed. According to the linked instructions you will need to slightly trim the bumper and the fascia. I have attached a copy of the installation instructions and an installation…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 9

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 10

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Does Curt Hitch # C92UR Fit 2019 Honda Civic Sedan 4 Door

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching