Can Lippert Components Electric Stabilizer Jack # LC369774 be Manually Operated

Question

Question:

If the motor fails for some reason, can you manually adjust the leveling?

asked by: Chris

0

Expert Reply:

Yes, the Lippert Components High-Speed Power Stabilizer Jack # LC369774 comes with a manual override crank handle so in the event you lost power you could still operate them.

I attached a review video for this kit for you to check out as well.

expert reply by: Jameson C

0

Answer 1

A corroded circuit breaker could certainly account for the sporadic operation of your trailer's powered stabilizer jack. So could loose or corroded wiring or connectors. For a new breaker you can use part #LC134181. This is a 6-amp…

view full answer...

Answer 2

I checked with Lippert and was able to verify that the exact replacement for your Lippert Model 113407 Stabilizer Jack is the Lippert Components High-Speed Power Stabilizer Jack #LC369774. This jack will bolt right up to the frame on your toy…

view full answer...

Answer 3

The Lippert High-Speed Power Stabilizer Jack part #LC298707 is a direct fit replacement for the Lippert Ultra Light Stabilizer Jack Model 113407. It does come with a new switch so you can either wire the jacks up to the old switch or install a new…

view full answer...

Answer 4

The best resource we can give you to help install the Lippert High-Speed Power Stabilizer Jack #LC369774 that you refernced would be to have you check out the install video we made when we had the chance to install this setup on a similar RV. The…

view full answer...

Answer 5

The direct replacement for your Lippert Components model 113407 stabilizer jacks can be found with part #LC369774 on our site. My contact at Lippert confirmed that this is the correct replacement.

view full answer...

Answer 6

Sounds like you are looking for a replacement stabilizer jack for the Lippert set you have installed on your RV. The direct replacement for your Lippert Model 113407 stabilizer jack is part #LC369774. This is the new part number.

view full answer...

Answer 7

The Lippert Components High-Speed Power Stabilizer Jack #LC369774 is designed to mount to existing holes that are spaced apart by 68-11/16 inches on center. As long as your Northshore Toy Hauler features the necessary bolt hole spacing on the frame…

view full answer...

Answer 8

The Lippert High-Speed Power Stabilizer Jack - White Switch Kit - 30" Lift #LC369774 you were looking at will be an exact replacement for the Lippert Stabilizer Jack 113407 you have on your camper. You can reuse your current switch, or if it is…

view full answer...

Answer 9

For your 2010 Springdale I suggest the Lippert Stabilizer Jacks #LC298707. This system bolts onto your trailer's frame and are equipped with a new motor that is twice as fast.

view full answer...

Answer 10

Thank you for the photo; you are going to need to replace your Lippert stabilizer jack 113407. The good news is we do carry the exact replacement, Lippert Components High-Speed Power Stabilizer Jack #LC369774.

view full answer...

Answer 11

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 12

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Can Lippert Components Electric Stabilizer Jack # LC369774 be Manually Operated

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching