What Vehicles Does Draw Tite Hitch part # 76286 Fit

Question

Question:

Hitch receiver 76268- is this specific to the RDX or will it go on any other makes/models? Thanks!

asked by: Pat

0

Expert Reply:

The Draw Tite hitch part # 76268 fits only the 2019 Acura RDX at this time (August 2019). If you have a different vehicle let me know and I can recommend a hitch for it as well.

expert reply by: Jameson C

0

Answer 1

The crossbar of the Curt 13423, which we refer to as part #C95CR is exposed, just like the Draw-Tite #76268 would be. I've linked to a photo showing what the Draw-Tite 76268 hitch looks like once installed, the Curt #C95CR would look almost…

view full answer...

Answer 2

We do have a hitch for the Touring model of the 2017 Honda CR-V. It is the etrailer Trailer Hitch item #e98848. This is the only hitch confirmed to fit the Touring model. As far as the foot activated lift gate sensor is concerned there is a…

view full answer...

Answer 3

If you were to install both the Draw-Tite Max-Frame Trailer Hitch Receiver #DT79MR (76342) and #76128 on your 2022 Honda CR-V you'd find that the DT79MR is going to sit about 1/2" higher so these are relatively at the same height.…

view full answer...

Answer 4

Typically the distance from the center of the hitch pin hole on a 1-1/4 inch hitch to the face of the opening on the hitch measures 2 inches whereas on a 2 inch hitch the distance is 2-1/2 inches.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

What Vehicles Does Draw Tite Hitch part # 76286 Fit

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching