Replacement Dome for Fan-Tastic Vent # B8100SD

Question

Question:

Wanting to know which vent cover to order to replace ours. Our cover is for an auto opening one and our RV is 2008 FW Expedition cover fantastic vent B8100SD

asked by: Jamie

1

Helpful Expert Reply:

I reached out to my contact at Fan-Tastic Vent and she said if your model B8100SD assembly has the domed lid the part # FVK1020-81 is the correct replacement. This particular lid is also available in a Tinted Shade with part # FVK1020-19.

expert reply by: Chris R

1

Answer 1

If the vent in your 2018 Georgetown Forest River is a Fan-Tastic roof vent then yes the replacement lid part #FVK1020-81 is the correct part you'd need. I attached a picture of what the fan you'd need to have in your RV looks like…

view full answer...

Answer 2

We do not have a direct replacement for a Dometic FV4101. However, we do have the #MA00-335001 in white or #MA00-335002 that are universal fit. please note the linked product review video.

view full answer...

Answer 3

You won't need to know the brand/model of your RV ceiling vent but you will need to know the type of hinge that's on the vent cover in order to determine the correct replacement; unfortunately this isn't information that is…

view full answer...

Answer 4

The Replacement Installation Hardware #K1520-09 that you referenced is compatible with the covers that would fit your Create a Breeze Fan-Tastic roof vent like the part #DMC38FR. I would recommend sticking with a Fan-Tastic cover for your vent as…

view full answer...

Answer 5

The Camco vent cover is not intended to work with the Fan-Tastic vents, so I am sorry that you had someone install an inefficient and less than ideal product saying they were compatible. You should have had the Fan-Tastic Vent Ultra Breeze Trailer…

view full answer...

Answer 6

The only difference is the roof vent models that each cover fits. The Fan-Tastic #FVU1500GR is meant to bolt right up to Fan-Tastic vents with part numbers beginning with "FA" or "FV". The #FVU1400GRS is meant for model number…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Replacement Dome for Fan-Tastic Vent # B8100SD

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching