Which Equalizer Upgrade Kit Fits a Tandem Axle Trailer with 35 inch Axle Spacing

Question

Question:

My trailer has a 35 inch axle spacing I won’t tp put a upgrade kit on it but the shackle on mine is 2-3/4 from center to center do they make a half inch shackle like that or do the 2-1/4 center to center will work

asked by: Douglas

1

Helpful Expert Reply:

Since your tandem axle trailer has an axle spacing of 35 inches the correct equalizer upgrade kit you'd want is the part # K71-449-00. The shackles of this kit are a little shorter at 2-1/4 inches but this kit would still fit and work well. The shackle angle would change slightly but it would not affect anything otherwise.

expert reply by: Jameson C

1

Answer 1

You would be fine to use the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers #K71-449-00 that you referenced which has shackle straps that are 1-1/4 inch shorter than what you have now. The ride height of the trailer would lower slightly…

view full answer...

Answer 2

I recommend going with the Dexter Heavy-Duty Suspension Kit #K71-449-00 on your trailer. This will have another 7-3/4" wide equalizer versus only the 5-3/4" wide one you get in the Kit #K71-359-00. Both kits will give you the shorter…

view full answer...

Answer 3

The exact replacement hub assemblies you need for your BD2-545-17 are the etrailer Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 #AKHD-545-35-K that you referenced.

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 6

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

view full answer...

Answer 7

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

view full answer...

Answer 8

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…

view full answer...

Answer 9

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

view full answer...

Answer 10

Since Grand Design is kind enough to list certain parts for their trailers I can confirm you have a 33" wheelbase on your 2020 Grand Design Transcend 27BHS. This means the MORryde Rubber Equalizers #MR87ZR will fit your trailer. Although I'm…

view full answer...

Answer 11

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 12

Hey Patrick, so for your leaf spring upgrade I am going to need to know a couple of things before I can get you over to the right part. Specifically, the length from eye to eye, the spring width, leaf thickness, and the number of leaves. From here I…

view full answer...