Replacement Cab Clamp Assembly for Extang Trifecta Tonneau Cover

Question

Question:

I have a 2017 1500 Silverado Truck I do not need the entire replacement Assembly just the clamp Please help Thanks

asked by: Dennis B

0

Expert Reply:

Thanks for your picture from that it looks like you have an Extang Trifecta tonneau cover and are needing a replacement cab clamp assembly part # EX1034. This is the only way to order and replace the part you are needing to replace.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I spoke with my contact at Extang a while back about the install of the front clamp for Trifecta Cover part #EX1034 and he said that you need to disconnect the screws from the crossbow of the cover so that it will drop down and the cab clamp assembly…

view full answer...

Answer 2

None of the methods are super easy. I'd recommend three though you have to remove hinges. This is least invasive, doesn't require cutting the cover, and also doesn't risk damaging cover.

view full answer...

Answer 3

Yes, the part #EX1035 is the correct replacement tail clamp assembly for an Extang Solid Fold tonneau cover like what you have. I attached install instructions for this clamp for you to check out as well.

view full answer...

Answer 4

I can help you with the process of replacing the Tail Clamp Assembly #EX1035 for your Extang Solid Fold or Solid Fold 2.0 tonneau cover. The replacement process will be different depending on if your existing cover is the Solid Fold or the Solid Fold…

view full answer...

Answer 5

Yes, the Replacement Cab Clamp Assembly part #EX1034 is a fit for a Extang Trifecta 2.0 Soft Tonneau Cover. In regards to installation, you'll need to disconnect the screws from the crossbow of the cover so that it will drop down and the cab…

view full answer...

Answer 6

You certainly can substitute the #EX1035 tail clamps with the #EX1034 cab side clamps for a more snug connection. Extang tells me that doing so is perfectly acceptable, but it will make removing the cover more difficult.

view full answer...

Answer 7

I reached out to my contact at Extang and there are replacement hinges available for the Extang Solid Fold Tonneau. To help you get the correct replacement hinges, I need to have the lot number on your cover. It will be on a white sticker on the…

view full answer...

Answer 8

I can help you with the process of replacing the Tail Clamp Assembly #EX1035 for your Extang Solid Fold or Solid Fold 2.0 tonneau cover. The replacement process will be different depending on if your existing cover is the Solid Fold or the Solid Fold…

view full answer...

Answer 9

I spoke with my contact at Extang about the install of the front clamp for Trifecta Cover part #EX1034 and he said that you need to disconnect the screws from the crossbow of the cover so that it will drop down and the cab clamp assembly will then be…

view full answer...

Answer 10

In order to install the Replacement Tail Clamp Assembly #EX1035 on your Extang Trifecta Tonneau Cover, you will need to cut a notch in the channel, somewhere near the middle of the cover. You should only need to make a notch on one side of the…

view full answer...

Answer 11

I was not able to find the installation instructions for the Replacement Tail Clamp Assembly, part #EX1035, but I did find the instructions for the Extang Solid Fold Tonneau Cover part #EX83700. I have attached those instructions and you can see…

view full answer...

Answer 12

A lid or cover does not need to be removed in order to install the Replacement Tail Clamp Assembly for Extang Solid Fold and Trifecta Tonneau Covers #EX1035. For the SolidFold 2.0 you will undo the screws from the crossbow of the cover which should…

view full answer...

Replacement Cab Clamp Assembly for Extang Trifecta Tonneau Cover

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching