What Is The Difference Between MaxxAir MaxxFan Standard Roof Vent and Mini Roof Vent

Question

Question:

What is the difference between the Maxxfan mini 4301M and the Maxxfan 4301K? It looks like they both fit a 14x14 rough in.

asked by: Gretchen B

0

Expert Reply:

The difference between the MaxxFan Roof Vent w/ 12V Fan # MA00A04301K and the MaxxAir MaxxFan Mini Roof Vent # MA00-04301M is the height of the fan and the roof thickness they will fit. The mini roof vent extends 2-7/8" above roof when closed while the standard Maxxfan Roof Vent extends 4-1/4" above the roof when closed. The mini roof vent also fits roofs 1" - 6-1/2" thick while the standard fits roofs 2" - 6-1/2" thick.

Both models have a 4 speed option, manual lift and fit 14W X 14L roof openings. I have attached video reviews of both products for your reference.

expert reply by: Heather A

0

John H.

5/26/2020

Does this mean that the Mini would open further compared to the standard model given a solar panel was installed 7" above the roof line over the fan?

Reply

Chris R.

5/28/2020

I'm not quite sure what you mean by opening further. Both models feature the same lid/hinge design. Can you tell me what you're referring to with regards to the solar panel you mentioned?

Reply

John H.

5/28/2020

@ChrisR With my roof rail system and solar panel mounting system, there is about a 7" gap from rooftop to bottom of solar panel. The fan will be mounted under the panel. So with the Mini fan sitting lower I assume it's hinge point is lower relative to say a Plus model van. So if a Plus model fan would open 3/4s of the way before hitting the panel, would a Mini open fully?

Reply

Chris R.

6/1/2020

@JohnH I get it now! Yes, the Mini Roof Vent # MA00-04301M will sit lower than the standard model. I'm not sure it will be able to open completely, but when open it'll save you at least around 2" of height compared to what you're using now.

Reply

Answer 1

The difference between the MaxxAir MaxxFan Mini Roof Vent #MA00-04401M and the MaxxFan Roof Vent #MA00A04401K does indeed simply have to do with its profile. The MaxxAir Mini Roof Vent will only extend 2-7/8 inches above the roof when it's closed…

view full answer...

Answer 2

M12-1.5 and 1/2"-20 threads are not going to be interchangeable. The diameter of an M12 thread is only going to be 0.4724" while 1/2" threads are going to be 0.500" in diameter. We currently only have 1/2"-20 Lug Nuts…

view full answer...

Answer 3

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 4

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 5

There are and were numerous 2-step Kwikee electric steps available. To ensure we get you the correct replacement I would need to know the series of the steps you have. Check the underside of your steps for any model numbers or other information. The…

view full answer...

Answer 6

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

I recommend the Seaflo Diaphragm Pump for Boats and RVs #SE58FR to replace your current Shurflo 2088-422-444. The Seaflo is 12v and 45 psi just like your current Shurflo but has 3.0 gallons per minute compared to the 2.8 gallons per minute your…

view full answer...

Answer 9

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

What Is The Difference Between MaxxAir MaxxFan Standard Roof Vent and Mini Roof Vent

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching