Replacement Brakes and Hub/Drums for Lippert 298276 and 122463

Question

Question:

Lippard Axel have break part number 298276 and a hub number 122463 looking for replacement

asked by: Douglas &

0

Expert Reply:

The correct replacement hub and drum assembly for your Lippert 122463 is part # AKHD-655-6-K for a regular grease cap or part # AKHD-655-6-EZ-K for an E-Z Lube grease cap. For replacement brakes the correct part is # AKEBRK-7-SA.

expert reply by: Jon G

0

Answer 1

The only difference between the #AKHD-655-6-K and the #AKHD-655-6-EZ-K is the cap that the hub uses. One is a solid cap and the other has a rubber plug that can come off for access to EZ lube fittings. Since you have caps already you could use either…

view full answer...

Answer 2

I reached out to my contact at Lippert and since your landing gear motor is blowing a fuse as soon as it sees load he mentioned the issue is more than likely that the motor is not getting the correct voltage, with the less common cause being the…

view full answer...

Answer 3

I reached out to my contact at Lippert regarding the issue you're having with the landing gear on your trailer and something jumped out at him right away as being the most likely culprit. He noticed that the voltage you checked at the battery was…

view full answer...

Answer 4

It sounds like the new higher-capacity Stromberg Carlson motor #LG-196308 you're using is drawing more power than your old motor did. It is likely that your wire gauge and/or fuse value are inadequate for the extra current drawn by the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacement Brakes and Hub/Drums for Lippert 298276 and 122463

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching