Tip for Installing Ventline Exhaust Fan Motor # BCD0390-00 If Connector Was Removed

Question

Question:

How is the motor BCD0390-00 supposed to be wired. I have bare wire with wire nuts, without a plug. How are you to figure out which black wire goes to which power lead?

asked by: Tracy

0

Expert Reply:

Since the # BCD0390-00 installs by using a connector normally it's hard to know exactly which wire goes where but the easy solution is that you should try connecting them in either configuration and if it works you are good, but if it works in reverse you'd need to reverse the wiring.

expert reply by: Jameson C

0

Answer 1

I spoke with my contact at Ventline regarding your Ventline exhaust fan model V2065. He stated that for a replacement motor, you will actually want the Replacement Fan Motor #BCD0390-00. This will work nicely as a replacement on your existing unit…

view full answer...

Answer 2

I show that motor #BCD0390-00 is the correct replacement for your V2245-50 vent. The fan associated with that motor is #BCD0311-00 if your original spins clockwise or #BCD0409-00 if it spins counter clockwise.

view full answer...

Answer 3

I spoke with my contact at Ventline and she stated that for your V2245-50 exhaust fan you can use the Replacement Fan Motor #BCD0390-00. This will work perfectly with your existing fan.

view full answer...

Answer 4

The correct replacement motor for your Ventline V2065 fan is indeed part #BCD0390-00 and the proper replacement fan blade is part #BVA0312-00. The replacement blade is 6-1/2 inches in diameter, which is what the 6.5 on your existing blade means.…

view full answer...

Answer 5

According to Ventline, the correct replacement motor for your model V2245-50 bathroom fan is the Replacement Fan Motor for Ventline Exhaust Fan #BCD0390-00.

view full answer...

Answer 6

The two black wires for your Ventline Replacement Fan Motor for Ventline Exhaust Fan #BCD0390-00 do not have any designation for power or ground. What changes is the direection the fa will spin. So, the easiest way to do this is too connect it to…

view full answer...

Answer 7

For your older Ventline 2394, you can use the Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents w/ Wedge-Shaped Dome #BVD0462-00. This kit includes the operator, knob, and mounting screw and is made in the USA. Attached…

view full answer...

Answer 8

I've attached the wiring guide for the Ventline Ventadome Roof Vent w/12V Fan and Wall Switch - Powered Lift - 14-1/4" - White Item #V2119-1-533. There is a white wire that should run from power supply to the fan motor and from the fan motor…

view full answer...

Answer 9

I believe what you're looking for, for your 2016 Coachman Class C Leprechaun BHF320 is the: -Replacement Screen Frame with Screen, Rocker Switch, and Wire for Ventline Roof Vents - Polar White #BVC0573-41R. This replacement screen and frame will…

view full answer...

Answer 10

We definitely have replacements for your Ventline 2262-50 motor and fan blade. With that being said, the Replacement 110-Volt AC Fan Motor for Ventline RV Bathroom Insert Fan with 50 CFM Capacity #BCD0388-00 will be a direct replacement. There does…

view full answer...

Answer 11

The correct replacement motor for your Ventline V2262-50 bathroom fan is actually the part #BCD0388-00. This will work perfectly with your existing fan as it is a direct replacement. The #BCD0390-00 Replacement Motor that you mentioned is designed…

view full answer...

Answer 12

The Replacement Fan Motor #BCD0390-00 referenced in your question is the correct motor for your Ventline V2045 model fan. I did also go out to our warehouse to take a look at the motor and measured a length of 1-1/2 inches for the exposed length on…

view full answer...

Tip for Installing Ventline Exhaust Fan Motor # BCD0390-00 If Connector Was Removed

Product Page this Question was Asked From

Continue Researching