Replacement M6 Bolt for Thule Podium 460 Foot Pack

Question

Question:

I am trying to find Thule part#919061631 which is a hex bolt m6 x 16 for my Thule 460 Podium Fix Point Foot rack that I purchased with my Hulavator 5 years ago. Need 3 bolts, cannot find them anywhere. What can you recommend as a comparable replacement?

asked by: Marcy Q

0

Expert Reply:

The Replacement Thule M6 x 16 Bolt part # 919061654 actually replaced the Thule M6 x 16 mm Bolt part 919061631 so you can use this in its place without issue. This bolt will work just fine with your Thule Podium Foot Pack part TH460.

expert reply by: Conner L

0

Answer 1

The screws for the #TH460R are m6x16 which we offer as part #919061654 but we do not have replacement screws for any of the fit kits as Thule does not offer that as replacement parts.

view full answer...

Answer 2

The Thule TK13 was replaced by the Thule Direct Mount Fit Kit for Podium Style Foot Pack 3113 - Fiberglass Roofs #THKIT3113. The Replacement FootBase Thule Tracker RoofRack FitKits TK1, TK2, TK6, TK7, TK8, TK9, TK10, TK11, TK12 #753-2149 are…

view full answer...

Answer 3

Yes you are correct the Rapid Podium Feet for Thule Crossbars #TH460R has replaced the existing feet for Thule Square Bars. This foot pack only works with the newer version of the Thule Square Bars that have a slot on the bottom of each side. I…

view full answer...

Answer 4

The Thule Replacement M6 x 16 mm Bolt #919061654 has a 6mm diameter thread and the length of the threaded portion is 16 mm. This is a replacement part for their Professional Ladder Tilt TH339 or Outrigger II easy loader extension bar TH847.

view full answer...

Answer 5

The part number of the mounting screws that comes with the Thule Rapid Podium Feet for Thule Crossbars - Fixed Point #TH460R is the Replacement M6 x 16 mm Bolt #919061654. Note that this part only comes with a quantity of 1 bolt. I went ahead and…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Don't worry Dave, we have everything you need. The Malone LowBed MicroSport Trailer #MPG464-LB will allow you to carry boats up to 20' long and can support up to 500lbs on the crossbars. So with the Bunk Kit #MPG561 and 2 Bike Racks #MPG2100…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement M6 Bolt for Thule Podium 460 Foot Pack

Product Page this Question was Asked From

Continue Researching