What Are Dimensions of Thule Replacement M6 x 16 mm Bolt # 919061654

Question

Question:

need bolt m6 x 16 for the 460r to connect to fit kit. would you know the exact specifications of it so i can find it locally? thanks in advance

asked by: Virgilio

0

Expert Reply:

The Thule Replacement M6 x 16 mm Bolt # 919061654 has a 6mm diameter thread and the length of the threaded portion is 16 mm. This is a replacement part for their Professional Ladder Tilt TH339 or Outrigger II easy loader extension bar TH847.

expert reply by: Adam R

0

Answer 1

The Replacement Thule M6 x 16 Bolt part #919061654 actually replaced the Thule M6 x 16 mm Bolt part 919061631 so you can use this in its place without issue. This bolt will work just fine with your Thule Podium Foot Pack part TH460.

view full answer...

Answer 2

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 3

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 4

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Any circuit boards included in a fan would definitely be brand and/or model specific so I checked with Ventline for a replacement for the board in your Northern Breeze V2501 fan. Unfortunately, Ventline no longer has stock of those circuit boards.…

view full answer...

Answer 7

The brackets on the Thule Hullavator 897 and the Thule Hullavator 897XT are not the same. The first generation Hullavator was designed to only work with Thule square bars, so it will not work with your Thule WingBar Evo. The updated model, 897XT, was…

view full answer...

Answer 8

Your older style Thule Hullavator is designed to fit Thule Aeroblade bars but it mounts to them in the channels that are on top of the bars and not by wrapping around them. The bolts needed are part #919061654 which then thread to the square nut…

view full answer...

Answer 9

Only the latest version of the Thule Hullavator part #TH898 is compatible with aero shaped crossbars. So your options at this point would be the new Hullavators and an aero shaped roof rack like you want (expensive I know...), or a square bar roof…

view full answer...

Answer 10

With the information I have, the Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners #AT3308046006 could be a protentional replacement for your Dometic Quick Cool Ducted Air Conditioner, however, if you're able to…

view full answer...

Answer 11

We do not have any photos or visuals on how the Replacement Aeroblade Shim for Thule Hullavator Kayak Carrier, part #TH56JV, attaches, but I can explain it for you. The curved portion is meant to attach upward into the bottom of your older Hullavator…

view full answer...

Answer 12

The mounts for the older Thule Hullavators, 897 and 897XT are different than the newest iteration, the Thule Hullavator Pro Kayak Carrier #TH898. If you have the oldest version, which is the 897 (and only available from February 2005 - December…

view full answer...

What Are Dimensions of Thule Replacement M6 x 16 mm Bolt # 919061654

Product Page this Question was Asked From

Continue Researching