How To Lock the Thule Rapid Gutter Feet TH300R

Question

Question:

Does the Item # TH450400 lock work on the Rapid Gutter Foot 300R? Does it prevent the Foot from loosening?

asked by: Thomas A

1

Helpful Expert Reply:

Yes, the Thule One-Key System Lock Cylinders part # TH450400 will work with your Thule Rapid Gutter Feet part # TH65BJ and it will prevent them from being removed from the vehicle without the key.

expert reply by: Conner L

1

Answer 1

The Thule Roof Rack you are seeking has been discontinued for your vehicle. Instead I recommend the Thule rack which consists of parts #TH711120, #TH710601 and #TH186007 for your 2017 BMW X3 with flush mounted rails. You will need 4 lock cores like…

view full answer...

Answer 2

You will actually be holding the bottom part of the bracket in place when you go to tighten the knob for the Rapid Gutter Feet for Thule Crossbars #TH300R. I have attached a sample installation video on a 2018 Jeep JL Wrangler Unlimited that you can…

view full answer...

Answer 3

If you have the Thule Gutter Feet, 5" High (Qty 4) #TH300R, then to remove the roof rack you will first need to see if you have the lock cylinders like #TH450400. If you have them then you will need to unlock the knobs to make the knob usable to…

view full answer...

Answer 4

For your 2020 Kia Telluride I recommend going with the Yakima JetStream Crossbars #Y00425 with RidgeLine Towers #Y00145 and RidgeClip Fit Kit #Y94FR. This rack will attach directly to your Telluride's side rails. When it comes to a kayak carrier…

view full answer...

Answer 5

If you have a Thule gutter mount roof rack why not instead replace the plastic cores with lock cores like with the Thule One Key System part #TH450400? This would give you the anti-theft deterrent you want and wouldn't require you to remove any…

view full answer...

Answer 6

If your Thule foot has a metal lock core then there will be a code either on the face of the lock core or on the barrel. Once you find this you can then find the correct replacement key by entering "THKEYNXXX" where the Xs are the part…

view full answer...

Answer 7

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...