Troubleshooting Installation of Titan Replacement Master Cylinder Assembly T1777401
Question:
Bought the complete set - Brake master cylinder T1777401 Brake kit 40716-15 flexible lines # 18TA-BLKIT and T1209800 Orifice Connector Did the air bleeding from all valves as well as brake lines However i couldnt get the brake work. The master cylinder seems too hard to pump/ push in It cant go in no more than 1/8 inch. I think some thing goes wrong with master cylinder. Please advise.
asked by: Kevin
Expert Reply:
Titan Replacement Master Cylinder Assembly # T1777401 for their model 6 drum brake actuator is shown in the linked review video. If you watch the video you'll see that when our reviewer handles the master cylinder the push rod assembly only travels a very small distance, perhaps 1/4-inch.
If you have bled all air from the reservoir, lines and brake assemblies themselves and you do not have hydraulic pressure reaching the brakes I suggest you check that the system is filled with the recommended DOT-3 brake fluid and repeat the bleeding process using a pressure type bleeder as recommended by Titan on page 2 of the instructions which I've linked separately. Be certain that all bleeder screws on the brakes are fully closed after this process and that all fittings are secure.
Products Referenced in This Question
Replacement Master Cylinder Assembly for Dexter Model 6 Brake Actuators - Drum
- Accessories and Parts
- Brake Actuator
- Hydraulic Drum Brakes
- Master Cylinder
- Dexter
more information >
Product Page this Question was Asked From
Kodiak Hydraulic Brake Line Kit - Tandem Axle - 18'
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 18 Feet Long
- Brake Lines
- Flexible Brake Hose
- Brake Line Kits
- Tandem Axle
- Kodiak
more information >
Continue Researching
- Shop: Kodiak Hydraulic Brake Line Kit - Tandem Axle - 18'
- Video: Kodiak Hydraulic Brake Line Kit Installation - 2018 Shasta Phoenix Fifth Wheel
- Video: Demco Hydraulic Brake Actuator Review
- Shop: Kodiak Hydraulic Brake Line Kit - Triple Axle - 20'
- Shop: Dexter Zinc-Plated Brake Actuator - Disc - Multi-Fit Ball - Bolt On - 7,000 lbs
- Shop: Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Shop: Kodiak Hydraulic Brake Line Kit - Tandem Axle - 20'
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Search Results: easy grease hub
- Video: Review of Bearing Buddy Trailer Bearings Races Seals Caps - Bearing Protector Caps - BB37SR
- Video: Review of Bearing Buddy Trailer Products - Bearing Protector Caps - BB57SR
- Video: Review of Dexter Brake Actuator - Replacement Master Cylinder Assembly - T1777401
- Video: Titan Brake Actuator T4395100 Review
- Video: Bleeding Brakes Demonstration
- Q&A: Do I Clean Or Replace The Master Cylinder on a Titan Model 6 Actuator That is Full of Rust?
- Q&A: Difficulty Bleeding Trailer Brakes with Titan Model 6 Actuator
- Q&A: How to Reset the Breakaway Lever on a Titan Model 6 Trailer Brake Actuator
- Q&A: How to Bleed Trailer Surge Brakes
- Q&A: Difference Between Bearing Buddy 2047 and 2047SS
- Shop: Trailer Hitch
- Search Results: 25580
- Q&A: Which Gen-Y Gooseneck Adapter Fits 2020 Keystone Raptor 424
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Search Results: surge brake actuator
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Shop: Brake Controller
- Search Results: brake line