Length of Replacement Arms for Dometic Spring-Loaded Manual Awning

Question

Question:

I measured from where the awning slides into the part that holds it to the camper to the bottom where it fastens to the bracket and it measures 81-1/2 inches. What length of supports do I need??

asked by: Rex J

0

Expert Reply:

For your 81-1/2 inch measurement you can replace the support arms on your Dometic spring-loaded manual awning with the Solera Classic Universal Awning Support Arms for RVs - 81" to 96" Arms # LC434720 (White) or # LC434719 (Black).

expert reply by: Kyle S

0

click to enlarge

Answer 1

I do have a solution, but we do not offer a left arm for your Dometic awning. What we do have is the Solera Classic Universal Awning Support Arms #LC434720 for 81" - 96" arms, or #LC434718 for 68" - 81" arms. These…

view full answer...

Answer 2

Your photo didn't come through, but you can use the Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms - White #LC434718 or #LC434717 in Black. This will replace your awning arms and give you a great…

view full answer...

Answer 3

Based on my research the 3310766.113P part number you mentioned is for a Dometic awning replacement arm assembly, which you are correct is no longer available. What we do have though is the Solera Classic Universal Awning Support Arms #LC434720 for…

view full answer...

Answer 4

The correct replacement option depends on the length of the arms that you are replacing. The arm length of 68 inches to 81 inches is the range that the Solera Classic Universal Awning Support Arms will replace. So if you have a spring-loaded manual…

view full answer...

Answer 5

We have universal support arms for awnings that do fit the Dometic awnings like what you have. For example, we have the part #LC434720 for arms that are between 81 and 96 inches, part #LC434718 which can be between 68 and 81 inches in length, and…

view full answer...

Answer 6

The Solera Classic Universal Awning Support Arms #LC434720 is designed to replace the arms and springs on your manual Dometic awning. You must have between 81"-96" in height between the top awning rail and where the bottom bracket mounts on…

view full answer...

Answer 7

If you have a Dometic spring-loaded manual awning on your 2015 Coachman Catalina 213BH we do have replacement awning support arms which will work; you simply need to choose the correct length and color from the following: - Solera Classic Universal…

view full answer...

Answer 8

Sorry to hear about your awning mishap but we can help you with a set of new awning arms you can use with your existing setup on your 2017 Keystone Bullet. Please refer to the linked page that displays replacement awning arms. We have kits for flat,…

view full answer...

Answer 9

Though we do not sell just one arm by itself The Solera Classic Universal Awning Support Arms for RVs - 81 inch to 96 inch Arms - White #LC434720 comes with the whole kit. This kit is designed to replace the existing support arms on your Dometic,…

view full answer...

Answer 10

The Solera Awning part #LC434718 that you referenced has varying lengths between 68 and 81 inches which allows for varying pitch options which is when the awning is open. I don't see how this would cause you to lose ground clearance.

view full answer...

Answer 11

The length of the arms you need for the Solera awning conversion kit simply depends on the amount of space you have for the brackets, which is what the "arms" are referring to. So what you'll need to do is measure from your awning rail…

view full answer...

Answer 12

The best option we have to replace an old Dometic awning arm is with the Solera Classic Universal Awning Support Arms part #LC434716 for 63"-68" or part #LC434718 for 68"-81". This is a universal kit that will allow you to keep…

view full answer...