Can Trailer Wheel part # AM20027 Handle 70 PSI

Question

Question:

I ordered 2 of the 215/60-8 kenda loadstar load range d tires. The max load is 1165 at 70 psi, are these wheels rated for 70 psi?

asked by: TANNER W

0

Expert Reply:

Yes, the trailer wheels part # AM20027 that you referenced can easily handle 70 psi. The recommended valve stems for this wheel are part # AM20904 which are rated for up to 80 psi as well.

expert reply by: Jameson C

0

Answer 1

You just need the valve stem that is associated with wheel #AM20539 for a proper fit. In this case it is valve stem #AM20904. This valve stem presses into the hole so that the larger diameter end won't allow it to pull out of the wheel. I…

view full answer...

Answer 2

The higher the ply rating, the tougher a given tire size is going to be. I would stick with the tires that are recommended by the trailer manufacturer. A tire that is rated lower but the same size can wear out faster because of its lower capacity.…

view full answer...

Answer 3

The Americana High Pressure Rubber Snap-In Valve Stem - 1-1/2" Long - Up to 80 psi #AM20904 fits any trailer wheel with a rim hole diameter of .453", which is the most common, so it will work just fine in your aluminum trailer…

view full answer...

Answer 4

The load range tire used is going to depend on the gross trailer weight capacity, which should be on a sticker or plate near the front of the trailer frame or in the trailer's literature. It probably also indicates the load range, or at least…

view full answer...

Answer 5

You have what is called a directional wheel. For a 14 inch directional wheel with 5 on 4-1/2 bolt pattern we have #AM20377 which is a powder coated silver. This is the only 14 inch, 5 on 4-1/2 directional wheel we have.

view full answer...

Answer 6

They are made in China. Dexstars are made in USA if that's what you are looking for.

view full answer...

Answer 7

The Dexstar Steel Directional Trailer Wheel part #AM20377 would be a perfect rim for the Karrier ST205/75R14 Radial Trailer Tire part #AM10235 and other tires of that size. I have included our entire selection below of rims that will work with the…

view full answer...

Answer 8

Thanks for the kind words, Scott! The Americana Wheel/Kenda tire combo you referenced #AM32156 has a 81mph speed rating. I've linked to our trailer tire help article, which contains more information about trailer wheels and tires than…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Can Trailer Wheel part # AM20027 Handle 70 PSI

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching