Motor and Gear Box Recommendation for Atwood Landing Gear 75722

Question

Question:

Im unable to find the Motor gearbox kit for 75722 for my camper electric jack. Is there a replacement for this and if so where would I look.

asked by: Gerry J

0

Expert Reply:

That's an older part number but the Atwood gear box part # LG-179015 would be what you would need. This is a fit for Atwood Standard Duty, Heavy Duty, and Super Duty 5th Wheel Landing Gear which would include what you have.

The 12-volt replacement motor for the Atwood 75722 motor is part # LG-142178.

expert reply by: Jameson C

0

Answer 1

I do have an option for you but we don't carry replacement parts for Dometic awnings unfortunately. That said, we do still have a way to get you back up and running and it's with the Solera 12V Electric RV Awning Conversion Kit part #LC434723…

view full answer...

Answer 2

Yes, the replacement motor that you need is part #LG-142178. Please note that you will need to swap out your gear box as well because the gear ratios are different. This replacement motor will fit the gear box #LG-179015 which is a replacement for…

view full answer...

Answer 3

The 12-volt replacement motor for the Atwood 75722 motor is part #LG-142178. This motor is 12-volt and has a lift capacity of 5,500 lbs. The motor has an overall height of 8-1/2 inches.

view full answer...

Answer 4

Yes, but the replacement motor we currently carry for your Atwood landing gear is part #LG-142178.

view full answer...

Answer 5

Since Atwood was bought out their products' discontinued replacement parts are scarce. The remaining Atwood landing gear parts we have are shown on the linked page. We do have some bevel gear kits for other jacks, such as #LC146060, but these…

view full answer...

Answer 6

Yes, to replace the Atwood 75722 electric motor we have found the part that will work is the Replacement Motor for Stromberg Carlson Electric Landing Gear #LG-142178. I have found a link to a video review for you to check out as well.

view full answer...

Answer 7

There are two measurements you will need to take in order to find the correct replacement landing gear legs for your Nu Wa Hitchhiker 5th wheel trailer. These measurements include the overall length of the leg's outer tube and the distance…

view full answer...

Answer 8

Atwood was sold to Dometic a few years back and replacement parts for older landing gear are scarce. We do still have Stromberg Carlson Landing Gear repair kit for the follow jack that will fit, part #LG-146060. For a lead jack repair kit use…

view full answer...

Answer 9

The replacement gears you mentioned are not likely to work if you machine the gear hole to fit; I can't say for certain as it's never been tested but it is highly unlikely. Atwood is out of business so there isn't another gear set that…

view full answer...

Answer 10

I wish we had access to that part number but since Atwood was bought and mostly dissolved as a brand the replacement part you are looking for is no longer available. Best option is a new drive leg as other brands will fit as a replacement like the…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Motor and Gear Box Recommendation for Atwood Landing Gear 75722

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching