Convert-A-Ball Interchangeable Ball Set 902B Ball Mount Compatibility

Question

Question:

Can you install a convert-a ball on a 2.5 class 4 ball mount

asked by: John P

0

Expert Reply:

The Convert-A-Ball Interchangeable Ball Set # 902B can install on any class of ball mount that has a 1-inch diameter ball hole and whose ball platform is not too thick for the shank which is 2-1/4-inches long. This multi-ball part will fit properly on a ball platform up to 1-1/8-inches thick. I confirmed this with Convert-A-Ball. This item is rated for 10,000-lbs towing no matter which ball size is installed.

For example, the Convert-A-Ball Ball Mount Class IV Ball Mount # AMSC2 has a ball platform that is 3/4-inch thick so it will work fine.

expert reply by: Adam R

0

Answer 1

Yes, we have the Convert-A-Ball Interchangeable Hitch Ball - 2 inch Diameter - Stainless Steel, #401B. This ball will work with the Convert-A-Ball Interchangeable Ball Set - Stainless, #906B.

view full answer...

Answer 2

You are correct! The thickness of the ball mount platform is 1 inch. We have hitch balls that will fit with capacities up to 7,000 lbs. The hitch ball shank length needs to be at least 2 inches. We also have convert-a-ball hitch balls that go up to…

view full answer...

Answer 3

I'm guessing you already have the 1 inch shank, and you're looking to add a 2 inch stainless Convert-a-ball, is that correct? If so, you'll want to use #401B which is compatible with 3/4 or 1 inch diameter shanks.

view full answer...

Answer 4

The only 2" hitch balls with 1" diameter shank that we offer which are made in the USA are from Convert-A-Ball who uses a unique interchangeable ball set like the Convert-A-Ball Interchangeable Ball Set part #902B. This set comes with a…

view full answer...

Answer 5

We do in fact have both a nickel and stainless steel version of our Convert-A-Ball Interchangeable Ball Set - 3 Balls - 1" Shank. The nickel version is part #900b and is the more economical of the two. The stainless steel version is part #902B…

view full answer...

Answer 6

There is not a replacement ball mount available for the Convert-A-Ball Adjustable Cushioned Ball Mount, CAB-UM, but there is what I believe is a better solution to your dilemma. The Convert-A-Ball Interchangeable Ball Set, item #906B, would give you…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Convert-A-Ball Interchangeable Ball Set 902B Ball Mount Compatibility

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching