Does Roadmaster Polyurethane Bushing Kit # RM-4139-125 Need Nuts to Install

Question

Question:

Hello, Does kit part # RM-4139-125 include the mounting nuts as well as the blots?

asked by: Jacob C

0

Expert Reply:

Since the bolts that come with the Roadmaster Polyurethane Bushing Kit # RM-4139-125 are designed to attach to threaded parts of the vehicle suspension nuts are not included or needed. Check out the install video I attached for more info on how it installs.

expert reply by: Jameson C

0

Answer 1

I apologize for the issue with the instructions link. I attached pictures that I took from the installation instructions that will show you how it installs.

view full answer...

Answer 2

I am not sure what is wrong with the links but I have included a picture of the instructions for the rear, #RM-4139-125, and for the front, #RM-4139-127, for your RV built on the 1997 Ford F-53. V8 chassis. The rear is on the top and the front is on…

view full answer...

Answer 3

I did some checking on your 1999 Fleetwood Bounder 34v and it appears that it was built on the Ford F53 chassis which is a common one for Class A RVs. There is a bushing upgrade kit for the rear anti-sway bar and it is #RM-4139-125. The single…

view full answer...

Answer 4

It sounds like you're looking for the Roadmaster Polyurethane Bushing Kit for 1-1/2" Diameter, Factory Rear Anti-Sway Bar #RM-4139-125, which would fit on your 1-1/2" diameter Roadmaster rear anti-sway bar. These are definitely better…

view full answer...

Answer 5

From the images you attached, description provided, etc. the Press In Window Edge Weatherstrip for Enclosed Trailer, #SR43FR that we offer is a similar product to what you have only in black. This will work as a replacement item if black is…

view full answer...

Answer 6

Some of the bushings on the Roadmaster #RM-4139-125 will need to be pressed in, but it is not overly difficult. I included an install video we have of a similar Roadmaster kit that will show how this needs to be done.

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Does Roadmaster Polyurethane Bushing Kit # RM-4139-125 Need Nuts to Install

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching