What Are The Correct TorkLift Custom Frame-Mounted Camper Tie-Downs For a 2018 Chevy 2500 Short Bed

Question

Question:

Will the C3212 camper tie downs fit on a 2018 chevy Silverado 2500 short box without having to drill any new holes?

asked by: Kayla

0

Expert Reply:

The correct Rear TorkLift Custom Frame-Mounted Camper Tie-Down for your 2018 Chevrolet Silverado 2500 Short Bed is part # TLC3215. The correct Front TorkLift Custom Frame-Mounted Camper Tie-Down for your 2018 Chevrolet Silverado 2500 Short Bed is part # TLC2223 if you have a Double Cab or part # TLC2220 if you have a Crew Cab, assuming you have a factory installed trailer hitch. These do not require drilling.

The TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLC2220 is for a 2011-2013 GM Truck and will not fit a 2018 GM Truck.

expert reply by: Conner L

0

Ron R.

1/13/2020

will TLC2223 fit on a 2018 Silverado 2500 crew cab with 6.5 bed?

Reply

Jason S.

1/16/2020

The TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2223 is not a fit for your truck. You will instead want # TLC2220 for your 2018 Silverado 2500 Crew Cab with 6.5 bed.

Reply

Answer 1

For your 2016 Chevy Silverado 2500HD Double Cab with the 6-1/2" bed you are going to want to use the TorkLift Custom Frame-Mounted Camper Tie-Downs part #TLC2223 and part #TLC3215. I called my contact at TorkLift and they were able to…

view full answer...

Answer 2

We do carry Torklift Tie Downs that fit your 2018 Chevy Silverado 2500HD short bed, double cab. For that you'd want the part #TLC2223 for the front and then for the rear #TLC3215. These are custom fit for your truck and by far the best…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

I would love to help you with this Adam, but I am going to need a bit of information on your exact setup to determine what all you will need. Can you tell me how heavy your car trailer is when loaded and how much extension you will need? Also I will…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 12

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

What Are The Correct TorkLift Custom Frame-Mounted Camper Tie-Downs For a 2018 Chevy 2500 Short Bed

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching