Replacement Axle Suspension System for 2010 Keystone Hideout 26RLSWE

Question

Question:

I have a Keystone Hideout 26RLSWE. I’m looking for a new axle.

asked by: Shawn

0

Expert Reply:

Thank you for the photo and the "SC = 68.50" means you have a spring-center to spring-center length of 68-1/2 inches and the "D35" means the axle is rated for 3,500 lbs. While we do not carry any axles with those specifications we do have a great solution, the Timbren Axle-Less Trailer Suspension System.

These are really an improvement over a traditional through-axle because they offer you an improved ride. They work independently (as opposed to an axle which is connected by a beam) so if there is a bump on one side of the road it won't rattle your entire trailer. The Timbrens also have progressive springs that absorb shock better than a traditional axle with leaf springs.

For a 3,500 lb capacity system there are a couple options, the Timbren Axle-Less Trailer Suspension System - Straight Spindle Only - 3,500 lbs # ASR3500S05 in which you can add your own hubs, either Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 # 84545UC1-EZ or the etrailer Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 # AKHD-545-35-EZ-K.

There is also the option of the Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs - Straight Spindle - 3,500 lbs # A35RS545E which comes with everything you need, including a hub and drum and electric brakes.

I have added links to video reviews for you to check out as well.

expert reply by: Kyle S

0

click to enlarge

Answer 1

The D44 on your axle tells me that you have a Dexter D44 axle, which has a 4400 lb capacity. Given that, and the length of the leaf spring you provided, the etrailer #e28SR would make for a good replacement spring. Increasing the capacity of your…

view full answer...

Answer 2

I do have a solution, but unfortunately we do not have a 3,500 lb axle that matches the length of your current axle. What I can offer is the Timbren Axle-Less Trailer Suspension System #ASR3500S05. This system will fit any frame width so it will work…

view full answer...

Answer 3

There are not installation instructions available specific to the Replacement MaxxAir Roof Vent Manual Lift. I have attached an exploded diagram that shows the placement of the lift in the fan assembly for your reference.

view full answer...

Answer 4

Hello 89 5, We do have a 3,500 lb axle with 89 inch hub face to hub face and 74 inch spring center to spring center that will work with a hub that has a 5 on 5" bolt pattern, but the hub just needs to be purchased separately as they don't…

view full answer...

Answer 5

Hey Scott, so the braking and hub components of a Dexter 3,500 lb axle made in 1999 would be the same as what's currently used so those components would transfer over. So a bare axle like the part #T3584F-EZ-8974 would work for you but you'd…

view full answer...

Answer 6

If you remove the hub and wipe away the grease on the spindle you can check to see if it is damaged. Look for an scarring, gouges, discoloration, or scoring on the spindle. If the spindle is damaged then the bearings won't ride properly and can…

view full answer...

Answer 7

Since Grand Design is kind enough to list certain parts for their trailers I can confirm you have a 33" wheelbase on your 2020 Grand Design Transcend 27BHS. This means the MORryde Rubber Equalizers #MR87ZR will fit your trailer. Although I'm…

view full answer...

Answer 8

Yes, the #TLD2142 is exactly what you need for your 2019 Ram 3500 with running boards extending under the truck bed. For the rear, you need the #TLD3112 if you have the factory hitch or #TLR3510 if you have the TorkLift SuperHitch Magnum 30K.

view full answer...

Replacement Axle Suspension System for 2010 Keystone Hideout 26RLSWE

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching