Comparing the TorkLift StableLoad Rear Suspension Upgrade Part TLA7311 and Part TLA7310

Question

Question:

what is the difference between a 7310 and 7311 will be putting on an 2016 Dodge Ram

asked by: Bruce H

0

Expert Reply:

The TorkLift StableLoad Rear Suspension Upgrade part # TLA7311 is a universal kit therefore comes with drill bits for applications that require a hole to be drilled into the leaf spring. The 2016 Ram 3500 already has the hole pre-drilled for you therefore you won't need the drill bits so you can use the TorkLift StableLoad Rear Suspension Upgrade part # TLA7310 instead assuming you have a 3500 model.

expert reply by: Conner L

0

Answer 1

Yes. I double checked this with TorkLift and the TorkLift StableLoad Rear Suspension Upgrade w Quick-Disconnects - Lower Overload Springs - Universal #TLA7311. These are a universal fit part, so they're designed to fit on a wide variety of…

view full answer...

Answer 2

The TorkLift StableLoad Rear Suspension Upgrade #TLA7311 that you referenced will require you to drill the leaf springs for installation. We do offer a few other solutions for your 2001 Dodge Ram that will allow you to install them without drilling…

view full answer...

Answer 3

Yes, the Air Lift LoadLifter 7500 XL Air Helper Springs #AL86KV that you mention will fit your 2022 Ford F-350 4WD Long bed perfectly! These springs provide your vehicle with up to 7,500 lbs of load-leveling support, resulting in reducing strain on…

view full answer...

Answer 4

Yes, you will need to drill into the leaf springs on your 2022 Ford F-250 Super Duty whether you go with the standard TorkLift StableLoad #TLA7311 or the Stainless Steel version #TLA7311S. I checked with TorkLift and it looks like you'll need to…

view full answer...

Answer 5

The best air bag kit for your 2022 Ford F-350 that has a single rear wheel axle is the part #F95FV which has the 5,000 lb capacity you are wanting. Firestone bags are superior Air Lift bags. The ply rating of the rubber is higher, the attachment to…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 10

I recommend going with the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL89DQ for hauling around an in-bed camper with your 2024 Ford F-350 Super Duty. I really like this kit because it has the higher 7,500 lb rating (which you don't…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Since you are pulling a trailer that weighs around 8,500 lbs. you would just want to stick with the Firestone Ride-Rite Air Helper Springs #F35FV (5,000 lb.). You really only need to spend more for the Firestone Ride-Rite Red Label Extreme Duty Air…

view full answer...