Wiring Gauge of Camco Power Grip RV Power Cord Adapter CAM55165

Question

Question:

Can you tell me the gage of the power grip cam55165?

asked by: Ed

0

Expert Reply:

Camco's Power Grip RV Power Cord Adapter # CAM55165 uses 10-gauge (3) internal wire that is 100% copper. This dogbone is rated for 125 volts/1875 watts and it is internationally certified for use in both the U.S. and Canada. It includes a limited 12-month warranty and features heavy-duty flame-retardant and flexible heat-resistant PVC sheath.

expert reply by: Adam R

0

Answer 1

Power Grip RV Power Cord Adapter w/ Handle - 125V - 30 Amp Female to 15 Amp Male Item #CAM55165 can technically work with up to 30 amps. Provided that the connectors mate up properly it would not be an issue. However, in the RV world, there are…

view full answer...

Answer 2

The Mighty Cord RV Power Cord Adapter #A10-1530BK does not have a fuse or breaker built into it. What would protect the circuit from being overdrawn would be a breaker on the 15 amp circuit that this is plugged into if it were to be overdrawn.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 5

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 6

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 7

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Wiring Gauge of Camco Power Grip RV Power Cord Adapter CAM55165

Product Page this Question was Asked From

Continue Researching