Can Power Grip RV Power Cord Adapter 125V - 30 Amp Female to 15 Amp Male CAM55165 Handle 20 Amps

Question

Question:

hi, the wire used for these looks heavy, whould it handle 20 amps? thx

asked by: Mike

0

Expert Reply:

Power Grip RV Power Cord Adapter w/ Handle - 125V - 30 Amp Female to 15 Amp Male Item # CAM55165 can technically work with up to 30 amps. Provided that the connectors mate up properly it would not be an issue. However, in the RV world, there are several different connector types depending on the amp rating so it is entirely possible, even likely, that you would not be able to plug it in. We do not have any 30 to 20 adapters. They are all 30 to 15, 30, or 50.

expert reply by: Michael H

0

Answer 1

Camco's Power Grip RV Power Cord Adapter #CAM55165 uses 10-gauge (3) internal wire that is 100% copper. This dogbone is rated for 125 volts/1875 watts and it is internationally certified for use in both the U.S. and Canada. It includes a…

view full answer...

Answer 2

The Mighty Cord RV Power Cord Adapter #A10-1530BK does not have a fuse or breaker built into it. What would protect the circuit from being overdrawn would be a breaker on the 15 amp circuit that this is plugged into if it were to be overdrawn.

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Can Power Grip RV Power Cord Adapter 125V - 30 Amp Female to 15 Amp Male CAM55165 Handle 20 Amps

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching