Will the B&W Custom Installation Kit For a 2019 Ram 1500 Work with a Reese 5th Wheel Hitch

Question

Question:

I own a 2012 ram 1500 5 1/2 foot bed truck. I am considering buying today a 2019 ram 1500 with a 6 1/2 foot bed. Will my reese hitch work with these rails? Also, i own the reese sidewinder and am wondering with the new length of bed would i have clearance issues between bumper and 5th wheel now? Will i need a new hitch, or is that sidewinder compatible with both bed lengths?

asked by: Gary

0

Expert Reply:

Yes, your Reese 5th Wheel Hitch will work with the B&W Custom Installation Kit w/ Base Rails part # BWRVK2604 which is a fit for a 2019 Ram 1500 with the 6-1/2' bed. If you have a Reese Sidewinder, you can reuse this with your Reese 5th Wheel Hitch on the new 6-1/2' bed. You would still need additional clearance in order to make a full 90 degree turn and that is what the Sidewinder will allow for.

expert reply by: Conner L

0

Answer 1

The fix for towing a 5th wheel with a short bed truck is either a slider hitch or for beds that are shorter than 6-feet a replacement trailer pin box called a Sidewinder. Sidewinders move the trailer pivot point 22-inches back from the king pin, to…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 8

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 9

There is a way to to a fifth wheel trailer with your 2020 Ram 2500 that has the Ramboxes but you have to install a Sidewinder pin box on the trailer so that the pivot point is raised up high enough that there isn't interference between the pin…

view full answer...

Answer 10

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 11

So for your set up, a 2021 Ram 2500 short bed with the RamBoxes, you will need to use a Sidewinder in order to have the clearance to tow a 5th wheel. The Goose Box doesn't move the pivot point and an offset ball just won't be enough for…

view full answer...

Answer 12

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Will the B&W Custom Installation Kit For a 2019 Ram 1500 Work with a Reese 5th Wheel Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching