Replacement Screen for Ventline Northern Breeze Vent

Question

Question:

Replacement Bug Screen for Fan-Tastic Vent RV or Trailer Roof Vents - Off White Item # FVK2034-80 I have a 2005 Arctic Fox Silver Fox truck camper with a Philips Ventline Northern Breeze 12 volt power ceiling vent. I need to replace the original vent screen, which is a 12 3/8 inch diameter. Your replacement screen appears to be a suitable replacement with respect to diameter, but the two items use differing methods to secure the screen to the fan body. Please see attached photo Will your screen work for this application?

asked by: James C

0

Expert Reply:

I do have an option for you but the Replacement Bug Screen part # FVK2034-80 is not correct for your Ventline Northern Breeze Vent nor is the correct replacement available as it has been discontinued by the manufacturer. The only option we can offer you is a new unit, the Ventline Ventadome Trailer Roof Vent part # V2092SP-28 or part # V2094SP-30 with fan. These units will however be a direct replacement for the Northern Breeze Vent you have now. The screen is also replaceable using the Replacement Screen for Ventline Ventadome Trailer Roof Vents part # BVD0434-31.

expert reply by: Conner L

0

Answer 1

My contact at Lippert was able to give me some information regarding the Tire Linc TPMS #LC37VR. The size of the sensor is fairly small, measuring about 3/4" thick and weighing 11 grams each. The battery life will depend on how much the…

view full answer...

Answer 2

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 3

Thanks so much for the detailed info and the photo, and I can verify that we do have the exact replacement for the Dometic 385311595 vacuum pump, which is the part number you asked about: - Replacement Vacuum Pump for Dometic VacuFlush RV Toilet…

view full answer...

Answer 4

Thank you for the photo of your 12-inch bug screen from your Fantastic Vent for which you need a replacement. Fantastic Vent's new design screen, which does NOT have the eight mounting holes, will work fine in place of yours. Part #FVK2034-80,…

view full answer...

Answer 5

The old screen design that you have now which was secured via screws around the outer perimeter has since been axed in favor of the plastic tabs that you see on the Replacement Bug Screen for Fan-Tastic Vent RV or Trailer Roof Vents part #FVK2034-80…

view full answer...

Answer 6

The number you mentioned is actually not a part number but we do have lift motors that would potentially work. To find out which lift motor you need there should be a number 7 or 17 on the actual motor, which is the RPMs of that motor. If the motor…

view full answer...

Answer 7

According to my research the Replacement Lift Arm for Fan-Tastic Vent Roof Vents #FVK8011-05 should be what you're looking for. Attached is a review video for you to check out.

view full answer...

Answer 8

The correct replacement arm for your Fan-Tastic Vent roof vent is the Replacement Lift Arm for Fan-Tastic Vent Roof Vents #FVK8011-05. The replacement arm is the same for the power lift and the manual vent.

view full answer...

Answer 9

The SAE number you provided is merely an identifier that states that the lamp conforms to certain DOT regulations. The Glo-Brite 410 has been discontinued and is no longer available. The closest replacement we offer is the Optronics #MCL48AB which is…

view full answer...

Answer 10

The Bearing Buddy Bearing Protectors #BB2441 provide premium protection for your wheel bearings. It is still recommended that you inspect the bearings, races, and seals every 12 months or 12,000 miles to ensure reliable performance on your trailer.…

view full answer...

Answer 11

Bearing Buddies like #BB2441 fit very tight into a trailer hub. In order to get them out, you will need to use a rubber mallet and persuade them out. Once the Bearing Buddy starts to unseat from the hub you can grab it and wiggle it out.

view full answer...

Replacement Screen for Ventline Northern Breeze Vent

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching