What Is the Correct Size Timbren Spacer for a 2018 Ford F-150

Question

Question:

What size spacer do In I need to order for the f150 kit the one with 3/8 bushing or 1/2 bushing thanks for your time

asked by: Dennis J

1

Helpful Expert Reply:

The Timbren Rear Suspension Enhancement System for your 2018 Ford F-150 is part # TFR1504E which uses an M10 bolt to attach the spring to the bracket. Therefore, you will need to use the Timbren Spacer part # TA25722-90F00 for 1/2" or part # TA25723-90AD00 for 1" which both have a 1/2" bushing.

expert reply by: Conner L

1

Answer 1

I spoke with my contact over at Timbren and he said there isn't a torque value for the hardware when installing kit #TFR1504E. He said to just tighten them until snug using regular hand tools. I know that is very subjective but tight using hand…

view full answer...

Answer 2

You'd need a 1 inch spacer with a 3/8 inch diameter bushing part #A25723-90AH00 to use with the part #TFR1504E as you have a 1 inch lift and the kit you have has a 3/8 inch diameter bushing.

view full answer...

Answer 3

We have found that it varies a little bit between vehicles. For some vehicles the unloaded ride quality is totally unaffected with the Timbrens. Typically this is on higher capacity vehicles where the suspension is already pretty stiff and…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 7

Hey Michael, thanks for reaching out! The Timbren Active Off-Road Bumpstops #T28GR you installed on your 2018 Ford F-150 unfortunately have that reputation among users (although Timbren claims their systems provide a smooth ride). Because of this we…

view full answer...

Answer 8

Yes we do have a set of Timbrens that fit your 2024 Toyota Tundra with the part #T45MR. These can give you up to an additional 6,000 lbs of suspension support.

view full answer...

Answer 9

The correct Roadactive kit that fits your 2023 Ford F-150 is the part #RAS3611-YHD. I really like the RAS kits as they basically don't have any downsides. You get the adjustable support, an easy install, no maintenance, and actually improves…

view full answer...

Answer 10

Thanks for reaching out, Jeff! While I'm not familiar with adding an OEM-style brake controller to a Ford pickup, since your 2019 F-150 didn't initially come with the factory tow package my instinct is to have you check fuse 24 for your brake…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

You can install a 7 way connector on your 2019 Ford F-150 by using the Curt T-Connector #C56413, which will plug into the factory supplied 4 way connector plug on your vehicle and give you a fully functioning 7 way connector. If you've got a…

view full answer...