Does RockyMounts LoBall Locking Truck Bed Bike Carrier Fit RockyMounts Truck Bed Track

Question

Question:

Are the RKY1096 fork blocks compatible with the RKY10993 bike rack? Thanks.

asked by: Doug W

0

Expert Reply:

Yes, the RockyMounts Truck Bed Track for Fork Mount Bike Racks # RKY1097 that you referenced is compatible with the RockyMounts LoBall Locking Truck Bed Bike Carrier # RKY1096 that you referenced and comes with the needed hardware to fit the blocks to the track.

expert reply by: Jameson C

0

Answer 1

The longest folding ramps we have for you is the Arched Loading Ramp Set part #288-07432 for 1 or part #288-07432-2 for 2 which are 90" long. The 90" length will ensure the angle that will be required to load the generator in your truck bed…

view full answer...

Answer 2

We have ramps that will work perfectly for loading your 1690lb UTV into the bed of your truck. I recommend the Arched Loading Ramp Set #288-07432-2 which is 90" long x 18" wide and has a combined weight capacity of 3000lbs. The included…

view full answer...

Answer 3

I do have a better option for you but I can't confirm the Swagman Pick-Up Truck-Bed-Mounted 2 Bike Carrier part #S64702 for a 2022 Honda Ridgeline. That said, the RockyMounts Truck Bed Track for Fork Mount Bike Racks part # RKY10993 is a much…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 7

It's very easy to install a trailer brake controller on a 2021 Honda Ridgeline. I recommend the Tekonsha Prodigy P3 Trailer Brake Controller part #90195 which comes with a harness that you could simply attach to the one that came with the…

view full answer...

Answer 8

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Answer 9

I have a few things for you to check when it comes to not being able to pair your iPhone with the Curt Echo #C51180. The first thing to do is make sure that you're pairing your phone with the Echo through the app. If you paired it through the…

view full answer...

Answer 10

Currently the Curt Echo Trailer Brake Controller #C51180 will not work with Android Auto on your vehicle dash. So while you will be able to use it on your android phone it will not interfere with you using the OneControl app while connected to…

view full answer...

Answer 11

All the brake controller needs to sense a trailer connection so that you can test it is a slight amperage draw on the output circuit. For that you can use a circuit tester like the part #PTW2993 with one pin grounded and the other on the output pin.…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Does RockyMounts LoBall Locking Truck Bed Bike Carrier Fit RockyMounts Truck Bed Track

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching