Brake Flange that Can Fit to Square Axle that is 1.5 inches by 1.5 inches
Question:
I have a Karavan Single PWC trailer that I want to add brakes too. It has a square axle 1.5inch 1775lbs per sticker and is an usual length axle. I was going to replace the axle but the 60inch is too long, so I have to make this one work. What brake flange works and brake hub/drum? Spindle I believe is 1 1/16
asked by: Juan J
Expert Reply:
You'd have to go with a brake mounting flange designed for a round axle since we don't have any specifically for square axles. Most likely some modifications will need to be made but since only people with experience installing brake flanges should perform this install they'll have a way to make it work.
Using a flange with a smaller center hole like the part # 4-34 might be the way to go since it would give you more metal to work with to get it to fit.
Products Referenced in This Question
Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 7 Inch
- 1-3/4 Inch Diameter Axle
- Redline
more information >
Product Page this Question was Asked From
Electric Trailer Brake Assembly - 7" - Right Hand - 2,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 2000 lbs
- Brake Assembly
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- etrailer
more information >
Continue Researching
- Shop: Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,000 lbs
- Shop: Brake Mounting Flange for 2-3/8" Round Axle
- Shop: Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Shop: Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4
- Shop: Trailer Axle Beam with Easy Grease Spindles - 89" Long - 3,500 lbs
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Shop: Demco Trailer Brake Mounting Flange - 4 on 4-13/16" Bolt Pattern - 2-3/4" Pilot Hole
- Q&A: Why Dont 2,000 Lb Trailer Axles Comes with a Brake Mounting Flange
- Q&A: Recommendation for Installation of a Brake Mounting Flange on a Trailer Spindle and Axle
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: etrailer Electric Trailer Brake Kit Installation
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Shop: Trailer Wiring
- Search Results: trailer brakes
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Search Results: l44649
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Shop: Brake Controller
- Search Results: 10~36
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tire Sizing
- Search Results: 10~51
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-35-SA Review
- Shop: Suspension Enhancement
- Video: Dexter Electric Trailer Brake Kit Installation 23-26