Comparing the Curt C13204, etrailer E98846, and Draw-Tite 75902 Hitch for a 2019 Nissan Rogue

Question

Question:

Who make your eTrailer brand hitches?

asked by: Joe F

1

Helpful Expert Reply:

The etrailer.com Trailer Hitch Receiver part # E98846 is made by Curt right here in the USA. The only difference between this and the Curt Trailer Hitch Receiver part # C13204 is that the Curt hitch has a glossy powered coated finish whereas the etrailer.com Hitch has more of a matte powered coated finish which we find does not draw as much attention to it. I have attached a photo comparison of these two finishes for you.

When comparing the etrailer.com and Curt hitches to the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75902 you will find that the latter has a more recessed hitch pin which may look a bit better but might also cause some issues for certain hitch mounted accessories like a bike rack therefore, I recommend either the etrailer.com or Curt hitch.

expert reply by: Conner L

1

click to enlarge

Answer 1

The only difference between the Curt Trailer Hitch Receiver part #C13427 and etrailer Trailer Hitch Receiver part #e95ZR which are fits for a 2021 Hyundai Palisade is finish. The Curt hitch has a glossy finish and the etrailer hitch has a matte…

view full answer...

Answer 2

The etrailer part #e95ZR and the Curt #C13420 that both fit your 2020 Hyundai Palisade are very similar in design and one would not be more hidden or necessarily install easier than the other. But I do recommend the Curt as it's got better weight…

view full answer...

Answer 3

The Curt #C13427 and etrailer.com #e95ZR hitches available for your 2022 Hyundai Palisade are indeed very similar to each other. Both are Class III hitches, have the same 5,000 pound towing and 750 pound tongue weight capacities, and are American…

view full answer...

Answer 4

There is a slight difference between the etrailer Trailer Hitch Receiver #e98869 and Curt Trailer Hitch Receiver #13241 that fits your 2020 Nissan Frontier, which is the finish. The etrailer hitch has a rugged matte black finish which is really good…

view full answer...

Answer 5

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 6

Exactly! Both hitches are very similar in design and construction. That is usually what happens when hitches are custom-fit for your vehicle. The main difference is the finish. I personally prefer the matte finish that #e98839 has. We have them on…

view full answer...

Answer 7

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

view full answer...

Answer 8

The Class II Curt Hitch #C12136 and Class II Draw-Tite Hitch #36493 for your 2016 Subaru Outback Wagon are very similar, but every Class I and Class II and some Class III Curt Hitches require stabilizing straps to be used when towing non trailer…

view full answer...

Answer 9

The etrailer.com Trailer Hitch Receiver #e98848 does require some fascia to be trimmed during installation (it's what allows for the hitch's sleek hidden design) and I can absolutely help you with this process. I have attached an image from…

view full answer...

Answer 10

Great question. The etrailer.com Trailer Hitch Receiver - Custom Fit - Matte Black Finish part #e98848 does require trimming the lower rear fascia. In the attached photos you can see that the lower rear fascia needs a 3"x3" square cut out…

view full answer...

Answer 11

To trim the bumper fascia on your 2019 Honda CR-V when installing the etrailer.com Trailer Hitch Receiver #e98848 you can use a pair of snips or simply a sharp utility knife. The material isn't too thick so it's not going to take a lot of…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Comparing the Curt C13204, etrailer E98846, and Draw-Tite 75902 Hitch for a 2019 Nissan Rogue

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching