Fittings for HTS Super Heavy Duty RV Sewer Hose

Question

Question:

I cant find the proper ends for this hose on your site.

asked by: Jim S

0

Expert Reply:

The HTS Super Heavy Duty RV Sewer Hose w/ Built-In Clamps # CAM39901 can work with any standard sewer hose fittings with the exception of the red "E-Z Coupler" fittings.

Camco specifically you could use adapters like Valterra Adapter # T1024VP, couplers like # CAM39203 as well as bayonet fittings and threaded fittings.

I have added a link to our entire selection of hose fittings, so you can choose the ones you need, just make sure they aren't the E-Z Coupler type.

expert reply by: Kyle S

0

Answer 1

You are correct there is a weight advantage for aluminum, item #C18100, over steel, item #CC-100, but the biggest reason aluminum is considered over steel, for most of our customers, is corrosion resistance and appearance. You do not need to upkeep…

view full answer...

Answer 2

Your old Trimark requires a cutout hole measuring 5" wide x 4.85" tall. You could use the Bauer Products Camper Door Lock #BA65FR that you were looking at but would need to trim the cutout hole an extra 1/4" wide to fit.…

view full answer...

Answer 3

The part numbers for the replacement bearings and seals are as follows: Inner bearing, part #L68149 Outer bearing, part #LM67048 Seals, part #58846 I have included product description links below.

view full answer...

Answer 4

The correct screen and frame replacement for your Ventline VD0434 is the Replacement Screen Frame with Screen for Ventline Ventadome Manual Lift Roof Vents - Birch White #BVC0573-31.

view full answer...

Answer 5

From the looks of your attached photo, you need a black water and gray water elbow valve for your trailer. The closest thing we have for the setup is the Bristol Double RV Waste Valves - Elbow - Rotating - 3" Spigot and 1.5" Hub to…

view full answer...

Answer 6

You can potentially use the Lippert Components Tote Tank Adapter #LC360789 with the Double Female Cam Lock Fitting #LC363201 to accomplish what you are wanting to do. If you are looking for something smaller then you'll have to modify the…

view full answer...

Answer 7

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Fittings for HTS Super Heavy Duty RV Sewer Hose

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching