Can Global Link RV Entry Door Locking Latch Kit be Ordered Keyed Alike

Question

Question:

Hi i have a customer that wants both doors on there camper to use the same keys for both. If i order this lock could i get lock sets with the same key code for them.

asked by: Domenic

0

Expert Reply:

Yes, if you select "keyed alike" from the drop down menu on the product page for the Global Link RV Entry Door Locking Latch Kit # 295-000019 that you referenced and ordered several of these latches they'd all show up using the same key.

expert reply by: Jameson C

0

Answer 1

We can get you an entry lock such as the #295-000019 keyed alike with various length lock cylinders for compartment locks such as 7/8 inch long #295-000003, 1-1/8 inch long, part #295-000004, 1-3/8 inch long as part #295-000005 and 1-3/4 inch long as…

view full answer...

Answer 2

The measurement that you took is correct, the 7/8" measurement for the Replacement Cam Lock Cylinder #295-000003 is for the cam length as you mentioned. You can order multiple of these so that they all us the same key if you change the keyed…

view full answer...

Answer 3

You sure can order the Global Link RV Entry Door Locking Latch Kit #295-000019, #295-000021, or #295-000002 with a keyed alike option. On the product page you will find a box with a drop-down feature and you can choose Keyed Alike or Keyed Unique,…

view full answer...

Answer 4

Yes, to get two of the Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option #295-000019 keyed alike you'll just have to select the drop down box by the add to cart button and choose keyed alike.

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 9

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 10

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Can Global Link RV Entry Door Locking Latch Kit be Ordered Keyed Alike

Product Page this Question was Asked From

Continue Researching