Slide Toppers in White Appropriate for 12 Foot Slide, 8.5 Foot Slide, and 5 Foot 10 Inch Slide Out  

With a 71.5" flange to flange measurement you would need the Solera RV Slide-Out Awning #LCV000165063 (black) or #LCV000163279 (white). This awning is designed to fit a 68" to 73" measurement so you'd have…

The only measurement I would need is the overall width of the slide-out including the flanges or trim around the perimeter of the slide-out. So if that measurement were 72 inches overall then you would use a 6-1/2 foot option such as #LCV000165063.…

The 6 inches (roughly) is on both ends. So about 12 inches total. There is a little wiggle room if you don't quite have 6 inches when installing a slide-out topper such as #LCV000168105 but not much.

If your slide out measures 6'5", you need the Solera RV Slide-Out Awning - 6'7" Wide - 48" Projection - Black Item #LCV000168105. This awning will give you the extra overhang on each side of your box for the…

The Solera 7' Slider (Slide-Topper) in Black w/ Black Hardware #LCV000168105 has an actual fabric width of 79 inches. The topper is measured for fit based on the flange to flange measurement of the slide-out to provide protection for the box…

Sorry about any confusion or mixed information you may have gotten but I can clear it up for you. Here are the parts you need for each of the outside flange to outside flange measurements you took. All of these awnings are black in color, as you…

For a trailer with a slide-out that has a flange to flange measurement of 71-1/4" you're looking for the Solera RV Slide-Out Awning - 6'1" Wide - 48" Projection - Black #LCV000165063. This awning is designed for slide-outs up…

For a 74-1/4 inch slide out you will need a 7 foot awning #LCV000163285 for white or #LCV000168105 for black.

The correct Solera RV Slide-Out Awning for a 72" wide slide-out (flange to flange) is part #LCV000163279 for white or part #LCV000165063 black.

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

The newer brackets aren't currently sold separately but I've run into your situation a few times and have just placed the inner bracket on the t-molding instead of on the wall of the slide out. You'll want to get the lower holes in the…

Hey Rose, based on the dimensions and color you mentioned the correct slide topper for your 2024 East to West Alta is the part #LCV000163292.