Solera Slide-Topper Awning Installation - 2016 Keystone Cougar XLite Fifth Wheel Video

The only gooseneck hitch option that currently offer for a 2021 GMC Sierra 2500 with the release not in the wheel well is the Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch #C60642. This hitch has a latch built into the hitch ball to lock…

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

The MORryde RV Cargo Sliding Tray, #MR77FR that is 72" x 26" with an 80 Percent Extension can be bolted to the bed of your truck using the included hardware or even rivets. There really is not a wrong way to install as long…

Yes, I would recommend using a weight distribution hitch with sway control. I am a big fan of Equalizer for their reliability, ease of use, and affordability. It looks like your 2022 E2W Alta 2810KIK TT tops out at 9,597 lbs when fully loaded. Weight…

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

The correct Bearing Buddy for your trailer depends on the inner bore of your hubs. Thank you for the axle reference information but this tell us other things (axle length of 89-inches and spring seat spacing of 74-inches) but not which hubs you have…

Anytime the trailer weighs more than half the weight of the vehicle itself, weight distribution is recommended. To choose the correct system, you'll want to determine the tongue weight of the fully loaded and ready to tow trailer. I'll lnk to…

Hello, for your 2019 Forest River Salem Hemisphere GLX Travel Trailer lets use the Solera RV Slide-Out Awning 13'1" #LCV000168109, it will fit your 12 foot awning and the Solera RV Slide-Out Awning - 7'1" #LCV000165062 will cover…

Put the pin back in and wind it 12-16 times rolling it towards the camper to put the correct tension in the slide topper #LCV000163285 before installing it. This will give you the correct amount of tension for extending and retracting the awning.

According to Solara (Lippert), the correct number of turns to set the proper tension of their slide toppers like #LCV000163285 is between 12 to 16 turns, so I'd consider 14 to be a pretty good happy medium.

To adjust the tension on your Solera RV Slide-Out Awning, #LCV000163285, you'll want to remove the slide topper from the brackets and reroll the awning roller 14 times to add enough tension to the springs. You'll also want to ensure your end…

Sounds like you have the Air Lift Kit part #AL57338 installed in your 2011 Chevy Silverado. If you check out the picture I attached you will see that when using this kit on a vehicle with fifth wheel/gooseneck rails you would not use the included…