Converting Vehicle Side 7-Way Trailer Wiring to 4-Way Standard Wiring
Question:
I have a 2001 Nissan Xterra I want to take off the 7 Pin and put a 3 pin with green,yello,white,brown which wires do I use and which wires don’t I use on the Xterra Thanks
asked by: Bob C
Expert Reply:
It sounds like you want to do a conversion from your 7-way to a standard 4-way trailer connection that has the 3 functions and ground. There are a couple different options for you that don't require much if you just need the 4-way connector for a trailer. You can use the Pollak 7 Pole to 4 Way Connector Adapter # PK12716 for the easiest connection.
Your 2001 Xterra didn't come with a factory 7-way so you may find there is a 4-way plug connection behind your 7-way that you can simply disconnect and use. On most 7-ways this means you won't use the purple, blue, and black wires.
If you want to remove wires from your 7-way and connect a 4-way in it's place, you will use the wire locations I've outlined in the attached photos to assist. I've also attached a wiring article to further assist. Colors sometimes don't directly line up but the pin locations and functions will. I recommend using the Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Vehicle End # HM48190 for that application.
Products Referenced in This Question
Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Vehicle End
- Trailer Wiring
- Trailer Connectors
- Vehicle End Connector
- Plug Only
- 4 Flat
- Hopkins
more information >
Product Page this Question was Asked From
Pollak 7 Pole to 4 Way Connector Adapter
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 7 Round - Blade
- Plug Only
- 4 Flat
- Pollak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: hm47605
- Shop: Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Vehicle End
- Shop: Curt LED 4-Way Flat Connector (Vehicle End) Tester
- Shop: Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Trailer End
- Shop: Vehicle Tow Bar Wiring
- Shop: Trailer Wiring
- Q&A: Does Curt 7-Way/4-Way T-Connector Fit 1999 Ford F-150 with Factory 7-Way
- Video: Roadmaster Tow Bar Wiring RM-300150-00 Review
- Video: Optronics Wiring - Trailer Connectors - A35W42B Review
- Video: Hopkins Tow Bar Wiring HM48235 Review
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C55774 Review
- Search Results: tll9rk
- Search Results: rm~154
- Search Results: hm38138
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Pole Flat Connectors
- Shop: Roadmaster Extension Loop for Towed Vehicles - Dual 4-Way Flat Trailer Ends - 6' Long
- Shop: Hopkins Wiring Harness with 4-Pole Flat Trailer Connector - Trailer End - 4' Long
- Shop: Hopkins 4-Pole Flat Wiring Extension - 120" Long
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Search Results: trailer hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: hitch
- Shop: Brake Controller
- Article: Trailer Wiring Diagrams
- Shop: Base Plate for Tow Bar
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Choosing Between the Brake Buddy Select 3 and the Blue Ox Patriot Supplemental Braking System
on Trailer Wiring
