Length of Bars on Curt Short-Arm Weight Distribution System
Question:
I have a V-nose trailer, and have installed chain hangers to adapt a WD system. My problem is the length of the bars. I need shorter bars, and was looking at the Curt short bar setup. What is the length of these?
asked by: Steve B
Expert Reply:
The Curt Short-Arm Weight Distribution Systems have trunnion bars which measure 28-3/8 inches, according to the manufacturer. These are pretty common on V-nose trailers, and come with a couple of different tongue weight options. I'll go ahead and list those out below so you can choose the right one:
- Curt Short-Arm Weight Distribution System with Shank - Trunnion Bar - 10,000 lbs GTW, 1,000 lbs TW # C17332
- Curt Short-Arm Weight Distribution System with Shank - Trunnion Bar - 15,000 lbs GTW, 1,500 lbs TW # C17333
Both of these systems come with everything you need for installation except the hitch ball; for that you will need the 2-5/16" Hitch Ball # 19286.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
Curt Short-Arm Weight Distribution System with Shank - Trunnion Bar - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- 900 lbs
- CURT
more information >
Product Page this Question was Asked From
Curt Short-Arm Weight Distribution System with Shank - Trunnion Bar - 15,000 lbs GTW, 1,500 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- 1200 lbs
- 1300 lbs
- 1400 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Curt Short-Arm Weight Distribution System with Shank - Trunnion Bar - 15,000 lbs GTW, 1,500 lbs TW
- Shop: Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K GTW, 1.5K TW
- Shop: Curt Short-Arm Weight Distribution System with Shank - Trunnion Bar - 10,000 lbs GTW, 1,000 lbs TW
- Search Results: 17422
- Search Results: 17333
- Video: Review of Curt Weight Distribution Hitch - WD Only - C17332
- Video: Curt Weight Distribution - WD With Sway Control - C17422 Review
- Search Results: equalizer hitch
- Shop: Chain Hangers for Reese Weight Distribution Systems - Clamp On
- Shop: Blue Ox 2-Point Weight Distribution w/ Sway Control - 6-Hole Shank - 12K GTW, 1.2K TW
- Shop: Chain Hangers for Curt Weight Distribution Systems - Bolt On
- Video: Review of Curt Weight Distribution - WD Only - C17333
- Video: Reese and Draw-Tite Weight Distribution Review
- Video: Reese Weight Distribution without Shank Review
- Search Results: sway control
- Shop: Blue Ox TrackPro Weight Distribution w/ Sway Control - 7-Hole Shank - 6K GTW, 600 lbs TW
- Search Results: front receiver hitch
- Shop: Tire Chains
- Q&A: Weight Distribution Recommendation for Trailer that Weighs 10,000 lbs with V-Nose
- Shop: Performance Chip Tuners
- Q&A: Curt Short-Arm VS Regular Weight Distribution System Spring Bar Length
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: weight distribution hitch
- Shop: Trailer Hitch
- Article: 5 Things to Know About Weight Distribution Hitches
- Search Results: tire chains
- Q&A: Question About a Product
- Video: Choosing the Right Brake Controller
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
on Weight Distribution Hitch
