Steering Stabilizer and Anti-Sway Bar Fit for Motor Home on 2001 Ford F-53 Chassis With V10 Engine

Question

Question:

What part # for: 2001 class a ford f53 chassis V 10 gas

asked by: Joel

0

Expert Reply:

The correct steering stabilizer for your Class A 2001 Ford F-53 Chassis with a V10 engine is the Roadmaster Reflex Steering Stabilizer # RM-RBK22-RSSA.

A steering stabilizer is a good way to enhance the ride of your motor home and improve your driving experience, though I do recommend adding a rear anti-sway bar and front anti-sway bar if you don't already have one because they are a vast improvement over the OEM bars and significantly improve your rig's handling so you can enjoy your ride. The best way to enhance the ride of your motor home is - in this order - rear anti-sway bar, then front anti-say bar, followed by a steering stabilizer.

For a rear anti-sway bar you would need Roadmaster Rear Anti-Sway Bar # RM-1139-143 if your coach is less than 34 feet long OR Roadmaster Rear Anti-Sway Bar # 1139-144 if your coach is 34 feet or longer. Please note that with these, you will need to check to ensure there is enough factory U-bolt available to accommodate the factory nut, washer and 1/2" plate. If the u-bolts are not long enough, the # RM-590050-00 U-bolt replacement kit is needed.

For a front anti-sway bar the correct part for your '01 F-53 chassis is the Roadmaster Front Anti-Sway Bar # RM-1139-148.

I have added links to video reviews of these parts for you to take a look at.

expert reply by: Kyle S

0

Answer 1

If your 28 series step is a single step then #LC3747453 will fit. It includes the upgraded components needed for it to work properly. If your current steps are more than a single step let me know.

view full answer...

Answer 2

For your 2024 Ford F-53, I recommend checking out the Timbren Front Suspension Enhancement System #TFFF53B for the front, and the Timbren Rear Suspension Enhancement System #TFRF53A for the rear. These kits do not require drilling, will replace…

view full answer...

Answer 3

The Roadmaster Rear Anti-Sway Bar for Motorhomes #RM-1139-143 can use your factory u-bolts if they are long enough. If they are not, then Roadmaster recommends using the 7/8 inch diameter u-bolts that are longer (most likely the larger diameter due…

view full answer...

Answer 4

Hey Scott, so we do have the SumoSpring Solo kit part #SSR-130-54 that is a confirmed fit for your 2018 Ford motorhome built on an E-450 chassis.

view full answer...

Answer 5

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8&quot; socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you…

view full answer...

Answer 6

For a 2023 Forest River FR3 30DS you could use either the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes #RM63RR or Roadmaster Reflex Steering Stabilizer with Mounting Brackets #RM62VR. Both stabilizers will…

view full answer...

Answer 7

Hey Ron, thanks for reaching out! We have two different steering stabilizers for your motorhome on a 2018 Ford F-53 chassis; the Roadmaster Reflex and the Roadmaster Exact Center. The Exact Center was supposed to be an upgrade to the Reflex but…

view full answer...

Answer 8

According to the fine folks at Roadmaster, the Roadmamaster Reflex Steering Stabilizer Kit #RM-RBK24-RSSC is indeed the correct steering stabilizer for your Gulfstream Class C on a 2017 Ford E450 Cutaway Van Chassis. If you click the provided link,…

view full answer...

Answer 9

The difference between the Roadmaster Reflex steering stabilizers is how they connect to the brackets that fit onto the RV. Take a look at the pictures I attached and you can see the difference between the ends of them. #RM-RSSA has eyes on both…

view full answer...