Roadmaster Front Anti-Sway Bar Installation - 2015 Ford F-53 Video

The Roadmaster Front Anti-Sway Bar #RM-1139-148 uses a 1/2-13 x 2” grade 8 bolt for the front brackets. I have in the past ran into this issue before but it's not very common so I would just run to your local hardware store and get some…

Adding the steering stabilizer and the front sway bar is definitely the first couple of steps that you want to take to help stabilize your motorhome. If you haven't already picked one out I recommend going with the Roadmaster #RM-1139-148…

You're on the money with what you need to improve the handling of your 2022 Fleetwood Bounder 33C motorhome. Big rigs like yours (which is on a Ford F53 chassis) can be very taxing due to how hard you have to work to keep it in line, so the best…

I recommend the Roadmaster Front Anti-Sway Bar #RM-1139-148 for the front of your 2011 Tiffin Allegro on the Ford F-53 22,000lb chassis. This will replace your current way bar with a thicker and stronger 1-3/4" sway bar and uses polyurethane…

All of the upgrades you mentioned would work great together and would give you the best ride possible. The biggest difference will be noticed with the upgrade of the rear sway bar, then the front, then the SumoSprings. For a rear sway bar you'd…

There isn't any follow up maintenance required after you install the Roadmaster Front Sway Bar part #RM-1139-148 on your RV. Just install it and enjoy your improved handling and ride quality!

Yes, since your 2019 Thor Miramar 34.2 Motorhome is a Class A with the V10 and has a GVWR of 22,000 lbs the Roadmaster Front Anti-Sway Bar #RM-1139-148 will fit your motorhome. Attached are some videos and the installation instructions for you to…

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

The Roadmaster #RM-1139-149 Rear Anti-Sway Bars that you referenced are the correct sway bars and hardware to replace those on your Ford F53 chassis. The bar is 1-5/8" thick and constructed from 4140 Chromoly steel for outstanding rigidity and…

I checked with Roadmaster and verified the correct front anti-sway bar for your Class A 2017 Ford F-53 chassis with a 18,000 lb GVWR; it is the following part number: - Roadmaster Front Anti-Sway Bar #RM-1139-148

The Roadmaster #RM-1139-140 and #RM-1139-148 are both replacement anti-sway bars for a Ford F550 or F53 Class A motorhome chassis. Both bars are 1-3/4 inches in diameter. The #RM-1139-140 fits models with a GVWR of 22K-24K, and the #RM-1139-148 fits…

Your 2005 Jeep Grand Cherokee 4x4 is towable with the Tow Dolly part #RM-2050-1 that you referenced. Jeeps are among the most popular vehicles to flat tow. The 2009 Dodge Nitro can also be flat towed but you will need to use a lube pump in the…