Will Fan-Tastic Vents Roof Vent Ceiling Garnish Fit Older Fan-Tastic 1200 Roof Vent

Question

Question:

I purchased and installed a Fan-Tastic 1200 roof fan and the leg on the included trim piece is too short. I see that Fan-Tastic has a newer model of my 1200 vent fan with the part number 801200. Will the FVK1060-81 garnish fit my older Fan-Tastic 1200?

asked by: Clint

0

Expert Reply:

I reached out to my contact at Fan-Tastic Vent and he said that if your model 1200 roof vent is under 5 years old then they know for a fact that the Ceiling Garnish # FVK1060-81 will fit. The company who previously owned Fan-Tastic Vent didn't keep records of replacements so if your vent is older than 5 years it is anyone's guess as to whether this garnish will fit properly or not. You can definitely try but there is no guarantee.

I did go out to the warehouse and found that the opening measures about 13-1/2" x 13-1/2" (see attached picture). You can use this to help determine if this will fit your older model.

expert reply by: Jon G

0

click to enlarge

Answer 1

When you need to trim a roof vent's plastic garnish trim ring like part #FVK1060-81 it is best to do so indoors so that the plastic is at room temperature. This will reduce its brittleness and chance of cracking or shattering. The warmer the…

view full answer...

Answer 2

The Off White Ceiling Garnish #FVK1060-80 will fit your application perfectly. It has the 6" leg that you'll need to cut down to fit your 5-1/4" application but aside from that everything else will match up perfectly. If you need a…

view full answer...

Answer 3

The roof vent dimensions of 14" x 14" or 14-1/4" x 14-1/4" are an industry standard. I would say around 95% (if not more) of all roof vents follow these standard dimension. The variances you are seeing most likely have to do with…

view full answer...

Answer 4

I attached a picture that shows the inside corners of the Ceiling Garnish #FVK1060-81 that you referenced to show you how round or square they are.

view full answer...

Answer 5

The garnish of the Fan-Tastic roof vent you have part #FV802250 is 4-1/2 inches tall but we do offer taller garnishes like the part #FVK1060-81 which is 6 inches tall and can be cut down shorter as needed.

view full answer...

Answer 6

On the wet equalizer bolt #126B2 it does not matter which way the hole faces. Up, down, left, right, anywhere in between, it's all good. A lock nut has mismatched threads a little ways along the thread spiral and either its threads, the bolts…

view full answer...

Answer 7

Yes, we sure do. The bolts used in the Replacement Shackle Link with Bolts for Dexter Trailer Suspension Kits part #018-026-05 are called "wet bolts". If you need the 3-1/4" bolts supplied with the shackle kit, you will want the Step…

view full answer...

Answer 8

It really shouldn't matter what direction the wet bolts part #126B2 install when used for equalizers or shackle straps. But if Dexter says to install them in the orientation you described then I would recommend you stick with their…

view full answer...

Answer 9

Most likely there is some old grease inside the bolt that's clogging things up. You can raise the trailer up and remove the wet bolt in question to give it a thorough cleaning or just simply replace the bolt altogether. Unfortunately there's…

view full answer...

Answer 10

The Ultra-Fab 5th Wheel King Pin Tripod Stabilizer part #UF19-950200 would be best for harsher environments. The Ultra-Fab 5th Wheel King Pin Tripod Stabilizer part #UF19-950600 has a black coating which will also resists rust but if this coating…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Will Fan-Tastic Vents Roof Vent Ceiling Garnish Fit Older Fan-Tastic 1200 Roof Vent

Product Page this Question was Asked From

Continue Researching