How Many Ring Terminals Are Included with Ring Terminal # 44-5310A

Question

Question:

Is the price listed for just one Ring Terminal?

asked by: Rick L

0

Expert Reply:

Yes, the listed price for the Ring Terminal # 44-5310A is for 1 ring terminal. This is designed for use with 12-10 gauge wire and features a 3/16 inch stud.

I have attached a short video review that you can check out as well.

expert reply by: Chris R

0

Answer 1

We have a kit that's designed for exactly what you are looking to do. The Trailer Wiring 7-Way Upgrade Kit part #HS381-9000 is designed for upgrading a trailer from a 4-way to a 7-way but can also be used with 5-way wiring as well very…

view full answer...

Answer 2

Wiring by function is the route to go for your situation. This is done by testing each wire of your trailer individually. The easiest way is to use a 12V battery and connect the negative terminal to the trailer's ground on the frame and then…

view full answer...

Answer 3

The first thing to determine with troubleshooting wiring is where that signal is lost. If it's on your vehicle side then it's a fuse or bad wiring somewhere but if it's on your trailer side then it could be a bad bulb, light fixture, or…

view full answer...

Answer 4

The Buyers Products Trailer Wiring Junction Box #3375601101 referenced in your question measures 6.5 inches long, 3.21 inches wide, and 2.5 inches tall when the cover is installed. The mounting holes at each end are spaced apart 7.38 inches on…

view full answer...

Answer 5

Yes, you will need to remove the paint in order get a better ground connection for your trailer's lights. This is a super common issue that we see and you nailed it with the solution you described. A lot of the time the aluminum is usedfor boat…

view full answer...

Answer 6

The ring terminal size you need for the posts of the junction box part #3375601101 that you referenced is 3/16 inch like the part #44-5310A which would work great. The terminal matches the correct ring size and also is designed for 10 to 12 gauge…

view full answer...

Answer 7

We have exactly what you are looking for. I recommend using the Optronics adapter #A75TB. This will plug in to your trucks 7 way and allow you to plug the 5 flat into the other end. This will allow the electric lockout on your brake actuator to…

view full answer...

Answer 8

On a 7-Way connector the suggested minimum wire gauge for the White (ground) wire, the Red or Black (power) wire, and the Blue (brake power) wire is 12 gauge. The minimum wire gauge for the remaining Green (right turn/brake) wire, the Yellow (left…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

How Many Ring Terminals Are Included with Ring Terminal # 44-5310A

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching