Solution for Wanting to Convert MaxxFan Roof Vent with Manual Lid to Powered Lid

Question

Question:

Is there a conversion kit to convert my manual max fan to a powered vent lift?

asked by: Mike

0

Expert Reply:

Since there isn't a way to convert a MaxxFan from a manual lift lid to a powered lift lid you'd have to replace what you have with the part # MA00-04500K that you referenced. Replacing the entire roof vent would be easier than trying to replace components of it as well.

expert reply by: Jameson C

0

Answer 1

The outer flange that sticks out to mount the MaxxAir MaxxFan Mini Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke Item #MA00-04401M is 16-1/4" x 16-1/4" so as long as you have at least 2-1/2" to 3" of space…

view full answer...

Answer 2

The difference between the MaxxAir MaxxFan Mini Roof Vent #MA00-04401M and the MaxxFan Roof Vent #MA00A04401K does indeed simply have to do with its profile. The MaxxAir Mini Roof Vent will only extend 2-7/8 inches above the roof when it's…

view full answer...

Answer 3

I went out and measured the outside to outside points on the flange for the MaxxAir MaxxFan, part #MA00-04401M, and it's 16-1/4 square. It does fit the standard 14 x 14 vent opening which is what you'll find on most trailers and…

view full answer...

Answer 4

Yes, for the white version of the MaxxFan Deluxe Roof Vent with 12 volt fan, thermostat, remote and powered lift we have the part #MA00-07000K which is exactly what you need.

view full answer...

Answer 5

Yes, you are correct. All you need to wire in the MaxxFan Plus Roof Vent #MA00-04500K that you referenced is a power and ground rated for at least 5 amps and a 14 inch by 14 inch square hole cut in your roof.

view full answer...

Answer 6

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

view full answer...

Answer 7

Yes, since MaxxFan uses a standard 14" x 14" opening the Dometic FanTastic Ultra Breeze Trailer Roof Vent Cover #DMC38FR will work fine.

view full answer...

Answer 8

You made a great choice in the Lippert Components Power Stabilizer Trailer Jack. For starters, all of the jacks measure to be 70-1/2" long with a 3,500 lb weight capacity and have a 30" lift. The difference between them is in regards to…

view full answer...

Answer 9

The correct circuit board for your MaxxAir MaxxFan 4951KS fan is the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. It also works with The MaxxAir MaxxFan 4751KS and 4761KS models as well.

view full answer...

Answer 10

I am afraid we do not carry the exact model fan 00-04951KSCX that you are looking for. We do have the MaxxAir #MA00-04751KSX which is a very similar MaxxFan Plus Roof Vent. This will be a suitable replacement for your vent, if you are looking to…

view full answer...

Solution for Wanting to Convert MaxxFan Roof Vent with Manual Lid to Powered Lid

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching