Do Polar and Redline T-Handle Latches Have Same Body Dimensions

Question

Question:

Does this have the same basic body as the L4080? will it fit in the same cutout?

asked by: Bob

1

Helpful Expert Reply:

Yes, the Polar T-Handle Latch # PLR5730 has the same body dimensions as the Redline T-Handle Latch # L4080 so you can use one in the place of the other. They will fit the same cutout.

expert reply by: Jon G

1

click to enlarge

Answer 1

I attached a picture that has all of the depth dimensions for the Polar T-Handle Latch #PLR5730 that you referenced.

view full answer...

Answer 2

Yes, the T-Handle Latch part #PLR5710 that you referenced does come with rods that attach to the door and pull in on the door releases as the latch is turned. I attached a picture that shows a similar latch and the rods it comes with to show you…

view full answer...

Answer 3

The T-Handle Latch - Stainless Steel #PLR5730 has holes 3-3/4 inches on center horizontally and 3-1/4 inches on center vertically. I've attached a photo to assist. The #L4080 has the same dimensions.

view full answer...

Answer 4

RV manufacturers don't maintain details on smaller items such as the locks they install so you will want to take note of the dimensions of the openings in the 2 storage compartment doors into which the locks mount as well as the type of lock.…

view full answer...

Answer 5

I went out to our warehouse to take a look at the Polar T-Handle Latch #PLR5710 that you referenced in your question. I measured a length on the included rods of right at 48 inches or 4 feet from end to end.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...