Polar T-Handle Latch # PLR5730 Depth from Mounting Flange

Question

Question:

HOW DEEP DOES THE ASSEMBLY SET FROM BACK OF FACE TO ACTUATING MECHANISM. AND IM SORT OF IN A TIME CRUNCH PLEASE HURRY

asked by: ST

0

Expert Reply:

I attached a picture that has all of the depth dimensions for the Polar T-Handle Latch # PLR5730 that you referenced.

expert reply by: Jameson C

0

click to enlarge

Answer 1

We have a number of striker latches available, like the Lippert Standard Baggage Door Latch Kit #LC317649. Your picture doesn't necessarily tell me what you need. If you wanted to provide some more context or provide alternate pictures I would be…

view full answer...

Answer 2

If you check out the attached dimension picture for the sink part #LC421572 you would be able to pretty easily tell if this would fit your Winnebago or not. If you need different dimensions let me know what you have and I can check to see if we have…

view full answer...

Answer 3

The closest we have to match those measurements is going to be the H-Channel for Enclosed Trailer #36281-955 which has an internal width of 1.027" and a height of 2". We do also have a C-Channel #362213-955 which has an inside measurement…

view full answer...

Answer 4

Measurements for the Replacement Strike Plate, #BA29VR, are 3-7/8" length and 1-1/8" wide. Please see the attached product review video with measurements.

view full answer...

Answer 5

The H-Channel for Enclosed Trailer #36281-955 is specifically designed for use with building cabinets and doors on a trailer. It is a sturdy aluminum that will will work well with the door frame as it is rust proof and will not corrode like…

view full answer...

Answer 6

Thank you for the pictures! For a replacement option I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K #DX29FR to replace your current actuator. The #DX29FR has a 7500lb trailer weight…

view full answer...

Answer 7

6.70-15 is an older tire size that can be replaced by 205/75-15 tires, which we do offer. I recommend going with the Westlake ST205/75R15 Radial Trailer Tire - Load Range D, #LHWL300. This is a great radial tire with a maximum load of 2,150 lbs. The…

view full answer...

Answer 8

I can offer what we have, though not make something work, it really depends on what size your wheel is. There is a 3,500 lb Timbren Axle-less system that is designed for use with larger tires and fits a hub with a 6 on 5-1/2" bolt pattern, so…

view full answer...

Answer 9

The B&W Companion 5th Wheel Trailer Hitch #BWRVK3500-5W should have long plastic foot pads that fit into the slats of a corrugated bed, but there should not be the need of any other kind of pad. With that said, the long plastic foot pads should…

view full answer...

Answer 10

The Kenda K353 Bias Trailer Tire - 5.30-12 - Load Range C #AM10066 has a speed rating of 65 mph and like you mentioned a max load capacity of 1,045 lbs at 80 psi. However you should make sure that the combined maximum load rating is higher than the…

view full answer...

Answer 11

To run a charge line to your battery you will first need to install a 7-Way on your trailer. This can be done using the Epicord 7-Way Molded Trailer Plug with Junction Box #277-000141. The Black wire in the junction box is the one that will carry the…

view full answer...

Answer 12

Yes we can get over or under slung axles. It would be very similar to the Dexter Idler Trailer Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs part #20545I-EZ-60-10 but you would have them custom make it with the spring…

view full answer...

Polar T-Handle Latch # PLR5730 Depth from Mounting Flange

Product Page this Question was Asked From

Continue Researching